One touch Window Module Suits Nissan Passengers Window Switch

Code: WM9

Once installed to any of the passenger’s window switches, to operate simply tap the existing switch once and the window will fully open or close without the need to keep holding the window switch in position.

Manual operation is still maintained, hold the switch to operate the window and release at any time for the window to stop.

Once fitted to the passenger’s window switch the corresponding window switch on the drivers master window switch becomes full auto for that particular window, enabling the driver to have full auto function at their fingertips in addition to the passenger.

 

AUD$46.00

Out of stock

Description

Module Function: 

Transforms a single passengers window switch and the corresponding window switch on the drivers master window switch to full one touch auto open/close operation, providing one touch windows from both the passenger’s window switch and the corresponding window switch on the drivers master window switch.

Can be used in conjunction with our existing auto window systems or as a standalone unit.

The patch harness is fully 100% direct plug & play connecting to the factory window switch connector, so no splicing or connecting to any individual wires is required.

System includes:

  • WM9 Module – Auto window control module (one module required for each passengers window switch)
  • Y patch harness with full 100% direct plug & play connectors (no splicing wires required)
  • Adhesive pad (hook & loop) to attach module to inside trim

Operating features: 

  • Hold window switch up or down for manual control from the passengers or drivers master window switch

    Window switch functions normally – window stops when the switch is released.

  • Tap the window switch once to initiate full auto window operation from the passengers or corresponding drivers master window switch

    Window will automatically close / open without the need to keep holding the window switch.

  • Compatible with our auto window and auto window and mirror modules

    All window functions are maintained when remotely opening or closing the windows from partially open to fully opening or closing.

 

Installation:

Remove the switch fascia for the X-Trail (T32) , for the NP300 (D23) partially remove the door panel to gain access to the underside of the window switch then it’s a simple plug and play installation, just unplug the existing window switch connector and fit the Y patch harness between the factory connector and window switch.

 

Suits:

Nissan X-Trail (T32)

Nissan NP300 (D23)

Nissan Qashqai (J11)

Subaru Outback (5th Gen)

NOTE: Suitable for both left and right hand drive vehicles, both single and dual cab models.

Additional information

Weight 0.075 kg
Dimensions 10 × 6 × 2 cm
Make Model Year
Nissan D23 2014 - 2022
Nissan D23 King Cab 2015 - 2022
Nissan D23 Sgl Cab 2015 - 2022
Nissan Qashqai J11 2014 - 2021
Nissan T32 2014 - 2021
Subaru Outback (5th Gen) 2014 - 2020

Reviews

There are no reviews yet.

Be the first to review “One touch Window Module Suits Nissan Passengers Window Switch”

Your email address will not be published. Required fields are marked *

Products that also suit

    Auto Accessories

    MU-X Dual Switch (factory fan and AUX input)

    Low on switch locations, this dual switch combines the factory MU-X rear fan function with an additional LED light bar or Driving Lights switch (custom icons available upon request).

    This dual switch is a direct replacement for the factory fan switch, no changes or modifications to the factory wiring required.

    The dual switch illumination is fully dimmable via the factory dimmer switch.

    Suits 2nd generation MUX models only.

     

     

    (0 reviews)
    AUD$55.00 Select options This product has multiple variants. The options may be chosen on the product page
    Auto Accessories

    Auto Folding Mirror Module suits Toyota Fortuner
    Auto Folding P71A Mirror Module suitable for the Toyota Fortuner 2015 – onwards
     
     
    Module function: Both mirrors will fold automatically in when the vehicle is locked using the remote key fob or sensor on the door handle, allowing full use of the mirrors to safely exit the vehicle on busy roads.
    Unlock doors using key remote or sensor on the door handle both mirrors fold back out.
    The module can be configured during the installation to unfold the mirrors when the vehicles is unlocked (default) or when the ignition is on (user selectable).
    Having the ability to fold the vehicles mirrors when locked will greatly reduce the risk of them be damaged by passing cars, cyclist and pedestrians.
     
    The existing mirror fold button retains full function and can override the operation of the P71A module. 
    (0 reviews)
    AUD$95.00 Add to cart
    Auto Accessories

    Auto Window & Mirror Module Suits Ford Ranger PX1

    Two great functions incorporated in the same module that is fully 100% direct plug & play no splicing into the vehicles central locking wires required.

    Can also be fitted to models that do not have the factory auto folding mirrors for the auto window function.

    Once the vehicle is locked using the key remote the side mirrors fold in and fold back once the vehicle is unlocked using the key remote (models with factory fitted electric folding mirrors).

    Always forgetting to close all the windows after you have removed the keys from the ignition or eliminate the possibility that your passenger’s have left the rear windows down without your knowledge leaving your vehicles contents vulnerable.

    This module allows for all windows to be automatically closed every time the vehicle is locked using the key remote, while still allowing for remote operation using your original key remote to open or close the windows.

    Transforms all the existing window switches on the drivers side to one touch open / close.

     

    (0 reviews)
    AUD$165.00 Add to cart
    Auto Accessories

    Auto Window & Mirror Module Suits Ford Ranger PX2 PX3 PU

    Two great functions incorporated in the same module that is fully 100% direct plug & play no splicing into the vehicles central locking wires required.

    Once the vehicle is locked using the key remote the side mirrors fold in and fold back once the vehicle is unlocked using the key remote.

    Always forgetting to close all the windows after you have removed the keys from the ignition or eliminate the possibility that your passenger’s have left the rear windows down without your knowledge leaving your vehicles contents vulnerable.

    This module allows for all windows to be automatically closed every time the vehicle is locked using the key remote, while still allowing for remote operation using your original key remote to open or close the windows.

    Transforms all the existing window switches on the drivers side to one touch open / close.

    This module is for right-hand drive vehicles only.

    Suitable For:

    Right-hand drive Ford Ranger models that have the factory fitted electric folding mirrors.

    (4 reviews)
    AUD$165.00 Add to cart
    Auto Accessories

    Auto Window Module Suits Mazda BT50 (pre MY21)

    Suits Mazda BT-50 (ford Ranger platform) 2011-2020

    Always forgetting to close all the windows after you have removed the keys from the ignition or eliminate the possibility that your passenger’s have left the rear windows down without your knowledge leaving your vehicles contents vulnerable.

    This module allows for all windows to be automatically closed every time the vehicle is locked using the key remote, while still allowing for remote operation using your original key remote to open or close the windows.

    Transforms all the existing window switches on the drivers side to one touch open / close.

    100% direct plug & play no splicing into the vehicles central locking wires required.

    (0 reviews)
    AUD$145.00 Add to cart
  • Auto Accessories

    Auto Folding Mirror Module Suits Subaru Second Generation WRX (VB) & Levorg (VN)
    Auto Folding P1VB Mirror Module suitable for the second generation Subaru WRX (VB) & Levorg (VN):
     
    Module function: Mirrors will fold automatically in when the vehicle is locked using the remote key fob or touch panel on the door handle, allowing full use of the mirrors to safely exit the vehicle on busy roads.
    Unlock doors using key remote or touch panel on the door handle both mirrors will fold back out.
    The module can be configured during the installation to unfold the mirrors when the vehicles is unlocked (default) or when the ignition is turned on (user selectable upon installation).
    Having the ability to fold the vehicles mirrors when locked will greatly reduce the risk of them be damaged by passing cars, cyclist and pedestrians and is a visual indication that the vehicle has been locked.
     
    The existing mirror fold button retains full function and overrides the operation of the P1VB module when the vehicles ignition is on.
    (1 review)
    AUD$99.00 Add to cart
-