Transforms a single passengers window switch to full one touch auto up/down operation and the corresponding switch on the drivers master window switch.

The patch harness is fully 100% direct plug & play connecting to the factory window switch connector, so no splicing or connecting to any individual wires is required.

System includes:

• Module – Auto up/down one touch window control module
• Patch harness with full 100% direct plug & play connectors (no splicing wires required)
• Adhesive pad (hook & loop) to attach module to inside trim.

IMPORTANT NOTE: Our system uses current sensing to operate the window regulator, it does not use anti pinch so if an object is encountered between the window and door frame the window will stop. Once the obstruction has been removed the window switch can be reused to continue window movement.

The window lock switch on the master window switch can still be used to isolate the passengers windows from operating.

Operating features: 

• Hold window switch up or down for manual control

    Window switch functions normally – window stops when the switch is released.

• Tap the window switch once to initiate full auto window operation

    Window will automatically close / open without the need to keep holding the window switch.

• When window is opening or closing tap the switch again to pause window.

Installation:

The door trim is not required to be removed.

• Remove switch fascia using a trim removal tool
• Disconnect existing factory window switch connector
• Fit supplied plug and play Y patch harness to the corresponding connectors
• Afix module to a smooth surface, with provided hook & loop adhesive pad
• Refit switch fascia.

The post Auto Up/Down Window Module Suits Toyota 100 105 Series Landcruiser appeared first on Trac Electronics.

• Full comprehensive instructions provided (via downloadable link) 
• Plug & play harness connects directly to all the factory connectors for true 100% plug & play 
• No cutting or splicing into any of the existing factory wiring 
• Fully reversible
• Dedicated harness connects to the module by a single connector 
• Compact design. 

• Mirror Module 
• Harness with direct 100% plug & play connectors 
• Hook & Loop adhesive pad to attach module to door 

The post Auto Folding Mirrors suits Suzuki Vitara (LY) appeared first on Trac Electronics.

Transforms a single passengers window switch to full one touch auto up/down operation and the corresponding switch on the drivers master window switch.

The patch harness is fully 100% direct plug & play connecting to the factory window switch connector, so no splicing or connecting to any individual wires is required.

System includes:

• Module – Auto up/down one touch window control module
• Patch harness with full 100% direct plug & play connectors (no splicing wires required)
• Adhesive pad (hook & loop) to attach module to inside trim.

IMPORTANT NOTE: Our system uses current sensing to operate the window regulator, it does not use anti pinch so if an object is encountered between the window and door frame the window will stop. Once the obstruction has been removed the window switch can be reused to continue window movement.

The window lock switch on the master window switch can still be used to isolate the passengers windows from operating.

Operating features: 

• Hold window switch up or down for manual control

    Window switch functions normally – window stops when the switch is released.

• Tap the window switch once to initiate full auto window operation

    Window will automatically close / open without the need to keep holding the window switch.

• When window is opening or closing tap the switch again to pause window.

Installation:

The door trim is not required to be removed.

• Remove switch fascia using a trim removal tool
• Disconnect existing factory window switch connector
• Fit supplied plug and play Y patch harness to the corresponding connectors
• Afix module to a smooth surface, with provided hook & loop adhesive pad
• Refit switch fascia.

The post Auto Up/Down Window Module Suits Toyota Rav4 2013-2018 Fourth generation (XA40) appeared first on Trac Electronics.

Passenger window switch (fitted to the front left / rear window switches) this transforms the passenger window switch and the corresponding switch on the drivers master window switch to full one touch auto, enabling the driver to have full one touch auto function of the passengers window operation at their fingertips in addition to the passenger.

NOTE: If you want all windows full one touch up/down then one module per window switch is required.

The patch harness is fully 100% direct plug & play connecting to the factory window switch connector, so no splicing or connecting to any individual wires is required.

IMPORTANT NOTE: Our system uses current sensing to operate the window regulator, it does not use anti pinch so if a object is in encountered between the window and door frame the window will stop. Once the obstruction has been removed the window switch can be reused to continue window movement.

The window lock switch on the master window switch can still be used to isolate the passengers windows from operating.

If your windows are not functioning properly (very slow at opening or closing) our system will not be suitable as it will detect over current due to the window regulator working harder than it should stopping the window movement.

System includes:

• Module – Auto one touch window control module
• Y patch harness with full 100% direct plug & play connectors (no splicing wires required)
• Adhesive pad (hook & loop) to attach module to inside trim.

Operating features: 

• Hold window switch up or down for manual control from the passengers or drivers window switch

    Window switch functions normally – window stops when the switch is released

• Tap the window switch once to initiate full auto window operation from the passengers or drivers master window switch

    Window will automatically close / open without the need to keep holding the window switch.

Ford Territory  (passengers window switch only)

• SX 2004.04~2005.09
• SY 2005.10~2011.03
• SZ 2011.04~2014.09

To fit the passenger’s module the door card is required to be partially removed to gain access to the window switch.

The post Auto up/down Window Module Suits Ford Territory appeared first on Trac Electronics.

First generation Mazda-BT-50 (UN models)

Second generation Mazda BT-50 (UR models)

(using the Ford Ranger platform).

NOT suitable for the BT-50 using the Isuzu D-Max platform (use WM3-A).

Module Function: 

Transforms a single passengers window switch and the corresponding window switch on the drivers master window switch to full one touch auto open/close operation.

Can be used in conjunction with our existing auto window systems or as a standalone unit, add one or to all passengers windows for full auto operation.

The patch harness is fully 100% direct plug & play connecting to the factory window switch connector, so no splicing or connecting to any individual wires is required.

IMPORTANT NOTE: Our system uses current sensing to operate the window regulator, it does not use anti pinch so if a object is in encountered between the window and door frame the window will stop. Once the obstruction has been removed the window switch can be reused to continue window movement.

The window lock switch on the master window switch can still be used to isolate the passengers windows from operating.

If your windows are not functioning properly (very slow at opening or closing) our system will not be suitable as it will detect over current due to the window regulator working harder than it should stopping the window movement.

System includes:

• Module – Auto window control module
• Y patch harness with full 100% direct plug & play connectors (no splicing wires required)
• Adhesive pad (hook & loop) to attach module to inside trim

Operating features: 

• Hold window switch up or down for manual control from the passengers or drivers master window switch

    Window switch functions normally – window stops when the switch is released.

• Tap the window switch once to initiate full auto window operation from the passengers or corresponding drivers master window switch

    Window will automatically close / open without the need to keep holding the window switch.

• Compatible with our auto window and auto window and mirror modules

    All window functions are maintained when remotely opening or closing the windows from partially open to fully opening or closing.

The post One touch Window Module Suits Mazda BT-50 (ford Ranger platform) Passengers Window Switches appeared first on Trac Electronics.

Module Function:

Lock doors, both mirrors fold in, unlock doors both mirrors fold out, button below the mirror directional switch operates normally when ignition is on and overrides auto fold mirror functions (applicable to models with factory fitted electric folding mirrors).

Models with proximity locking, the mirrors will also fold in and open windows will close when the vehicle automatically locks.

Windows will be automatically closed if left open after the ignition has been turned off and the doors locked using the key remote or button on the door handle. In addition windows can be controlled remotely by the key remote to open and close or pause during operation.

NOTE:  The lock switch on the driver’s window can still be used to lock the front passengers window from opening/closing.

When in the locked position the front passengers window is isolated from all functions of the auto window module. Only the front drivers window will automatically close/open using the key remote.

For full remote control of all windows the lock switch on the driver’s window is required to be in the off position.

The harness is fully 100% direct plug & play connecting to all applicable factory connectors, so no splicing or connecting to any individual wires is required.

System includes:

Module – Auto windows & Auto mirrors (in the single module)
Wiring harness with full 100% direct plug & play connectors (no splicing into the vehicles central locking wires required)
Adhesive pad (hook & loop) to attach module to inside of door trim
Full comprehensive installation instructions are provided via downloadable link that is included on the packaging, simply scan QR code with mobile phone or tablet.

Tools Required:

Phillips screwdriver
Trim tool.

Operating features:

Auto window up:

After ignition is off and all doors are closed, press lock on the key remote, the front windows will close, if left down after ignition is turned off.

Using the key remote to lower all windows vehicle remains unlocked:

When engine is off, press unlock-lock-unlock the front two windows will lower. To lock doors after this function, press lock on the key remote, to lock and close all windows press lock again at any interval.

Pausing window opening / closing:

Press lock or unlock on the key fob after using the key fob to remotely open or close the windows, all windows will then pause.

When ignition is on all windows become one touch auto up/down function from the driver’s window switch panel by depressing each individual switch for half a second.
All windows will retract down slightly:

After ignition is off, press lock-unlock-lock on the key remote, all windows will lower a small amount for ventilation.

Lock vehicle without closing windows:

After ignition is off and the door is closed, press unlock-unlock-lock, only locks the vehicle without lifting the windows.

Auto folding the side mirrors when locking the car (models with factory fitted electric folding mirrors):

After ignition is off, press lock on the key remote, both side mirrors will automatically fold in.

Auto unfolding the side mirrors when unlocking the vehicle:

When vehicle is already locked, press unlock on the key remote, both side rear view mirrors will automatically fold out.

9. Deactivate auto window close on lock:

Before turning off the ignition pre-set the passengers’ window to the desired height then press the window lock button on, this will prevent the passengers’ window from auto closing (the driver’s window will be the only window that will auto close upon locking).

The post Auto Window & Mirror Module Suits Isuzu D-Max LS-U Space Cab appeared first on Trac Electronics.

The module is designed for quick installation, simply remove the factory connector from the back of the idle off switch and fit our dedicated wiring harness between the factory idle off switch and factory connector.

No cutting or splicing into factory wiring is required, once fitted the system is fully functional with no additional programming or input required by the driver.

Every time you then start the vehicle within a few seconds the module will automatically deactivate the factory idle off function, there is no requirement to press the idle off switch every time the ignition is turned on.

Should you need to revert back to the idle off function, once the engine is operating to temporary turn the Idle Stop System back on, simply press the factory idle off switch and the function will be reinstated.

Once the vehicle has been turned off (for at least fifteen seconds) and back on the Idle Stop System will always default to off.

Installation:

Remove coin tray then reach up behind the idle off switch to disconnect the factory connector, then simply fit the supplied patch harness between the factory wiring and switch.

The post Idle Off Eliminator suits BT-50 appeared first on Trac Electronics.

• Passenger window switch (fitted to the front left / rear window switches) this transforms the passenger window switch and the corresponding switch on the drivers master window switch to full one touch auto, enabling the driver to have full one touch auto function of the passengers window operation at their fingertips in addition to the passenger.
• Drivers window switch (fitted to the drivers master window switch) this transforms the right-hand window switch to full one touch auto.

If you want all windows full one touch up/down then one module per window switch is required.

The patch harness is fully 100% direct plug & play connecting to the factory window switch connector, so no splicing or connecting to any individual wires is required.

IMPORTANT NOTE: Our system uses current sensing to operate the window regulator, it does not use anti pinch so if a object is in encountered between the window and door frame the window will stop. Once the obstruction has been removed the window switch can be reused to continue window movement.

The window lock switch on the master window switch can still be used to isolate the passengers windows from operating.

If your windows are not functioning properly (very slow at opening or closing) our system will not be suitable as it will detect over current due to the window regulator working harder than it should stopping the window movement.

System includes:

• Module – Auto one touch window control module
• Y patch harness with full 100% direct plug & play connectors (no splicing wires required)
• Adhesive pad (hook & loop) to attach module to inside trim.

Operating features: 

• Hold window switch up or down for manual control from the passengers or drivers window switch

    Window switch functions normally – window stops when the switch is released

• Tap the window switch once to initiate full auto window operation from the passengers or drivers master window switch

    Window will automatically close / open without the need to keep holding the window switch.

Drivers side module only suits Ford Falcon Ute (passengers side module is also compatible with the Sedan models):

• BA 2002.09~2005.10
• BF 2005.10~2008.02
• FG Series 1 2008.02~2011.10
• FG Series 2 2011.10~2014.09
• FG X 2014.10

To fit the passenger’s module the door card is required to be partially removed to gain access to the window switch.

To fit the driver’s module (FG models), first remove the T20 screw that is located under the rubber pad, remove the plastic cup (BA/BF models) using a plastic trim tool pry up the back of the window switch assembly to gain access to the window connector.

Then both systems are plug and play by fitting a Y patch harness between the factory wiring and window switch.

The post Auto up/down Window Module Suits Ford Falcon Sedan appeared first on Trac Electronics.

Transforms a single passengers window switch and the corresponding window switch on the drivers master window switch to full one touch auto operation.

The patch harness is fully 100% direct plug & play connecting to the passengers factory window switch connector, so no splicing or connecting to any individual wires is required.

IMPORTANT NOTE: Our system uses current sensing to operate the window regulator, it does not use anti pinch so if a object is in encountered between the window and door frame the window will stop. Once the obstruction has been removed the window switch can be reused to continue window movement.

The window lock switch on the master window switch can still be used to isolate the passengers windows from operating.

If your windows are not functioning properly (very slow at opening or closing) our system will not be suitable as it will detect over current due to the window regulator working harder than it should stopping the window movement.

System includes:

• Module – Auto one touch window control module
• Y patch harness with full 100% direct plug & play connectors (no splicing wires required)
• Adhesive pad (hook & loop) to attach module to inside trim
• Installation instructions via a QR code on the packaging.

Operating features: 

• Hold window switch up or down for manual control from the passengers or drivers master window switch.

    Window switch functions normally – window stops when the switch is released.

• Tap the window switch once to initiate full auto window operation from the passengers or drivers master window switch.

    Window will automatically close / open without the need to keep holding the window switch.

The post Auto up/down Window Module Suits Toyota Aurion appeared first on Trac Electronics.

Module Function: 

Transforms the drivers right front window switch to full one touch auto operation in both directions.

The patch harness is fully 100% direct plug & play connecting to the factory window switch connector, so no splicing or connecting to any individual wires is required.

IMPORTANT NOTE: Our system uses current sensing to operate the window regulator, it does not use anti pinch so if a object is in encountered between the window and door frame the window will stop. Once the obstruction has been removed the window switch can be reused to continue window movement.

The window lock switch on the master window switch can still be used to isolate the passengers windows from operating.

If your windows are not functioning properly (very slow at opening or closing) our system will not be suitable as it will detect over current due to the window regulator working harder than it should stopping the window movement.

System includes:

• Module – Auto one touch up/down window control module
• Y patch harness with full 100% direct plug & play connectors (no splicing wires required)
• Adhesive pad (hook & loop) to attach module to inside trim

Operating features: 

• Hold window switch up or down for manual control from the passengers or drivers master window switch

    Window switch functions normally – window stops when the switch is released.

• Tap the window switch once to initiate full auto window operation from the passengers or drivers master window switch

    Window will automatically close / open without the need to keep holding the window switch.

The post Custom Made (pg3) appeared first on Trac Electronics.