Description
Module Functions:
Lock doors, both mirrors fold in, unlock doors both mirrors fold out button below the mirror directional switch operates normally when ignition is on and overrides auto fold mirror functions (applicable to models with factory fitted electric folding mirrors).
Models with proximity locking, the mirrors will also fold in and open windows will close when the vehicle automatically locks.
Windows will be automatically closed if left open after the ignition has been turned off and the doors locked using the key remote or button on the door handle. In addition windows can be controlled remotely by the key remote to open and close or pause during operation.
NOTE: The lock switch on the driver’s window can still be used to lock the rear and front passengers windows from opening/closing.
When in the locked position the rear and front passengers windows are isolated from all functions of the auto window module. Only the front drivers window will automatically close/open using the key remote.
For full remote control of all windows the lock switch on the driver’s window is required to be in the off position.
The harness is fully 100% direct plug & play connecting to all applicable factory connectors, so no splicing or connecting to any individual wires is required.
System includes:
- P32B Module – Auto windows & Auto mirrors (in the single module)
- Wiring harness with full 100% direct plug & play connectors (no splicing into the vehicles central locking wires required)
- Adhesive pad (hook & loop) to attach module to inside of door trim
- Full comprehensive installation instructions are provided via downloadable link that is included on the packaging, simply scan QR code with mobile phone or tablet.
Operating features:
- Auto window up:
After ignition is off and all doors are closed, press lock on the key remote, the front two and back two windows will close in succession, if left down after ignition is turned off.
- Using the key remote to lower all windows vehicle remains unlocked:
When engine is off, press unlock-lock-unlock the front two then the back two windows will lower. To lock doors after this function, press lock on the key remote, to lock and close all windows press lock again at any interval.
- Pausing window opening / closing:
Press lock or unlock on the key remote during auto window operation, all windows will pause.
- When ignition is on all windows become one touch auto up/down function from the driver’s window switch panel by depressing each individual switch for half a second.
- All windows will retract down slightly:
After ignition is off, press lock-unlock-lock on the key remote, all windows will lower a small amount for ventilation.
- Lock vehicle without closing windows:
After ignition is off and the door is closed, press unlock-unlock-lock, only locks the vehicle without lifting the windows.
- Auto folding the side mirrors when locking the car (models with factory fitted electric folding mirrors):
After ignition is off, press lock on the key remote, both side mirrors will automatically fold in.
- Auto unfolding the side mirrors when unlocking the vehicle:
When vehicle is already locked, press unlock on the key remote, both side rear view mirrors will automatically fold out.
Passengers Module Functions:
Transforms a single passengers window switch and the corresponding window switch on the drivers master window switch to full one touch auto operation.
Can be used in conjunction with our existing auto window systems.
The patch harness is fully 100% direct plug & play connecting to the factory window switch connector, so no splicing or connecting to any individual wires is required
Fast installation as the door panel is not required to be removed, just the trim around the window switch.
System includes:
- WM3 -A Module – Auto one touch window control module for a passenger’s window switch
- Y patch harness with full 100% direct plug & play connectors (no splicing wires required)
- Adhesive pad (hook & loop) to attach module to inside trim
Tools required:
- Phillips screwdriver
- Trim tool
Operating features:
- Hold window switch up or down for manual control from the passengers or drivers master window switch
Window switch functions normally – window stops when the switch is released.
- Tap the window switch once to initiate full auto window operation from the passengers or drivers master window switch
Window will automatically close / open without the need to keep holding the window switch.
- Compatible with our auto window and auto window and mirror modules
All window functions are maintained when remotely opening or closing the windows from partially open to fully opening or closing.
Reviews
There are no reviews yet.