Auto Folding Mirror Module suits Suzuki Vitara

Products that also suit

• 

  • 
  • 

  Auto Accessories

  Auto up/down Window Module Suits Ford Territory

  Transforms a single window switch and the corresponding window switch  on the drivers master window switch to full one touch auto up/don operation.

  Once installed to operate simply tap the existing window switch once and the window will fully open or close without the need to keep holding the window switch in position.

  Manual operation is still maintained, hold the switch to operate the window and release at any time for the window to stop.

   

   

  (0 reviews)

  AUD$49.50 Add to cart
• 

  Auto Accessories

  One touch auto up / down window module suits Mitsubishi Triton & Lancer

  Once installed to any of the passenger’s window switches, to operate simply tap the existing switch once and the window will fully open or close without the need to keep holding the window switch in position.

  Manual operation is still maintained, hold the switch to operate the window and release at any time for the window to stop.

  Once fitted to the passenger’s window switch the corresponding window switch on the drivers master window switch becomes full auto for that particular window, enabling the driver to have full auto function at their fingertips in addition to the passenger.

  Installation:

  Remove the window switch fascia by first removing the single Phillips screw then inserting a trim tool between the fascia and door panel and prying upwards, then it’s a simple plug and play installation, just unplug the existing window switch connector and fit the Y patch harness between the factory connector and window switch.

  (0 reviews)

  AUD$49.50 Add to cart
• 

  • 
  • 

  Auto Accessories

  Auto Folding Mirror Module suits Mazda 6 (GL)

  Auto Folding Mirror Module suitable for the Mazda 6 GL models

  • 07/2016 – 2023

   

  Module function: Mirrors will fold automatically in when the vehicle is locked using the remote key fob or touch panel on the door handle, allowing full use of the mirrors to safely exit the vehicle on busy roads.

  Unlock doors using key remote or touch panel on the door handle both mirrors will fold back out.

  Having the ability to fold the vehicles mirrors when locked will greatly reduce the risk of them be damaged by passing cars, cyclist and pedestrians and is a great visual indictor that the vehicle has been locked.

   

  The existing mirror fold button retains full function and overrides the operation of the module when the vehicles ignition is on.

  Rated 5.00 out of 5

  (1 review)

  AUD$115.00 Add to cart
• 

  • 
  • 
  • 

  Auto Accessories

  Auto Window Module Suits Mitsubishi Triton

  Always forgetting to close all the windows after you have removed the keys from the ignition or eliminate the possibility that your passenger’s have left the rear windows down without your knowledge leaving your vehicles contents vulnerable.

  Transforms all the existing window switches on the drivers side to one touch open / close.

  This module allows for all windows to be automatically closed every time the vehicle is locked using the key remote or button located on the front door handles (if applicable), while still allowing for remote operation using your original key remote to open or close the windows.

  To suit Mitsubishi :

  Triton MQ, 2015 – 2018

  Triton MR, 2018 – 2022

  Rated 5.00 out of 5

  (1 review)

  AUD$140.00 Add to cart
• 

  • 
  • 
  • 

  Auto Accessories

  Central Locking Tailgate System Suits D-Max/BT-50 MY21-26

   

  This system seamlessly integrates with the existing vehicles central locking functions, so you can be assured when locking your vehicle with the factory remote, doors sensors or even with the proximity locking the tailgate is also secure.

  Designed for simply installation, there is no drilling, cutting or fabrication work required, you don’t even need cut into the rubber grommet in the firewall, and in fact you don’t even need to lift the bonnet.

  Is also compatible with the new MY24 and onwards face lift D-Max models.

   

  Rated 5.00 out of 5

  (4 reviews)

  AUD$185.01 Add to cart
• 

  • 
  • 
  • 

  Auto Accessories

  Auto Folding Mirror Module & Central Locking Tailgate Bundle System suits Ford Ranger

  Auto Folding P51A Mirror Module & Central locking tailgate system suitable for the Ford Ranger 

   

  This system is fully compatible with the Ford Ranger MK2, MK3 & PU from 2015 – 2022 that have the mirror fold button above the mirror adjustment switch. 

  Note: Not suitable for the Next Gen Ford Ranger

   

  Mirror Module function: Lock doors using the key remote or touch censor on the door handle (if equipped). both mirrors fold in, unlock doors using key remote both mirrors fold back out or turn ignition on mirrors fold out (this is user defined on installation).

  Having the ability to fold the vehicles mirrors when locked will greatly reduce the risk of them be damaged by passing cars, cyclist and pedestrians.

   

  The existing mirror fold button retains full function and can override the operation of the P51A module. 

  Central locking Tailgate system suits:

  No splicing into the vehicles electrical system is required this is a 100% true plug & play harness connecting to the existing factory central locking connector that is located behind the fuel release cover.

  Uses existing vehicles remote or via the door handle sensor (if equipped).

  Laser cut 304 Stainless steel actuator bracket included, so no additional drilling into the vehicles metal tailgate required uses existing mounting fixtures.
  Pre-bent actuator rod is also supplied so no additional fabrication required.

  Features:

  • No soldering or splicing into the existing wiring required, true plug & play
  • Direct connections to the factory wiring and actuator
  • Approximately 3 meters in length
  • Cable is fully protected by convoluted tubing
  • Manufactured here in Australia
  • Cable ties included
  • Torx T30 bit included
  • 3mm Hex shaft drill bit included
  • High quality actuator with Japanese Mabuchi motor with controlled push/pull force of > 4.0kgs for long term reliability
  • Housing is made from Nylon & POM is fully sealed with reinforced steel rivets
  • The actuator head has a full 360° rotation and is fully removable making installation of the included metal rod simple
  • Laser cut 304 Stainless steel actuator bracket, so no additional drilling into the vehicles metal tailgate required as uses existing mounting fixtures
  • Pre-bent actuator rod so no additional fabrication required
  • Comprehensive DIY installation instructions provided (via downloadable link just scan the QR code included with the packaging).

  (0 reviews)

  AUD$220.00 Add to cart