Auto Folding P41 Mirror Module suitable for the first generation Toyota 86 and Subaru BRZ models
Module function: Mirrors will fold automatically in when the vehicle is locked using the remote key fob or touch panel on the door handle, allowing full use of the mirrors to safely exit the vehicle on busy roads.
Unlock doors using key remote or touch panel on the door handle both mirrors will fold back out.
The module can be configured during the installation to unfold the mirrors when the vehicles is unlocked (default) or when the ignition is turned on (user selectable upon installation).
Having the ability to fold the vehicles mirrors when locked will greatly reduce the risk of them be damaged by passing cars, cyclist and pedestrians.
The existing mirror fold button retains full function and can override the operation of the P41 module.
Tailgate central locking suits Mazda BT-50 models.
Only fits Mazda BT-50 UR Models that have the key lock within the tailgate handle.
NOTE: Not suitable for the new BT-50 based of the Isuzu platform (refer # T2HKIT)
No splicing into the vehicles electrical system is required this is a 100% true plug & play harness connecting to the existing factory central locking connector that is located behind the fuel release cover.
Laser cut 304 Stainless steel actuator bracket included, so no additional drilling into the vehicles metal tailgate required uses existing mounting fixtures. Pre-bent actuator rod is also supplied so no additional fabrication required.
Two great functions incorporated into this full replacement master window switch assembly.
Always forgetting to close all the windows after you have removed the keys from the ignition or eliminate the possibility that your passenger’s have left the rear windows down without your knowledge leaving your vehicles contents vulnerable.
Suitable for the All New Isuzu D-MAX and Mazda BT-50 MY21 onwards models including the face lift MY24 D-Max and MY25 BT-50.
Our system allows for simple plug & play no cutting of any of the factory wiring is required ,the head unit is not required to be removed.
The included wiring harness is fully terminated so no additional wiring is required simply plug the patch harness in between the factory wiring and the supplied dual switch, that incorporates the anytime camera activation and Traction Control functions.
Suits all N80 SR models without factory one touch auto window open/close operation.
Once installed to any of the passenger’s window switches, to operate simply tap the existing switch once and the window will fully open or close without the need to keep holding the window switch in position.
Manual operation is still maintained, hold the switch to operate the window and release at any time for the window to stop.
Once fitted to the passenger’s window switch the corresponding window switch on the drivers master window switch becomes full one touch auto for that particular window, enabling the driver to have full one touch auto function at their fingertips in addition to the passenger.
Remove the trim around the factory switch then it’s a simple plug and play installation, just unplug the existing window switch connector and fit the Y patch harness between the factory connector and window switch in place.
Auto Folding Mirror Module suitable for the Mazda 2
(DJ/DL) 02/2017 – 2026
Before purchasing ensure your window and mirror switch are the same as shown.
Module function: Mirrors will fold automatically in when the vehicle is locked, allowing full use of the mirrors to safely exit the vehicle on busy roads.
Unlock doors both mirrors will fold back out.
The module can be configured during the installation to unfold the mirrors when the vehicles is unlocked (default) or when the ignition is turned on (user selectable upon installation).
Having the ability to fold the vehicles mirrors when locked will greatly reduce the risk of them be damaged by passing cars, cyclist and pedestrians and is a great visual indictor that the vehicle has been locked
The existing mirror fold button retains full function and overrides the operation of the module when the vehicles ignition is on.
Auto Folding Mirror Module suitable for second generation Isuzu D-Max and first generation MU-X
D-Max from 2012 – 2020 (not suitable for the All New D-Max MY21 refer to #P31)
MU-X from 2013 – 2020 (not suitable for the new 2nd generation MU-X refer to #P31B)
This system is suitable for the above vehicles that have the factory mirror fold switch located on the dash
Plug & play harness to the factory mirror switch and only requires connection of up to two wires (using included T taps) to the factory central locking wiring, located in the lower kick panel.
Trevor Roether (verified owner) –
Reasonably easy to install and it works a treat!