Auto Folding Mirror Module suitable for the Toyota Landcruiser 300 Series GX model.
Module function: Mirrors will fold automatically in when the vehicle is locked using the remote key fob or touch panel on the door handle, allowing full use of the mirrors to safely exit the vehicle on busy roads.
Unlock doors using key remote or touch panel on the door handle both mirrors will fold back out.
The module can be configured during the installation to unfold the mirrors when the vehicle is unlocked (default) or when the ignition is turned on (user selectable upon installation).
Having the ability to fold the vehicles mirrors when locked will greatly reduce the risk of them be damaged by passing cars, cyclist and pedestrians.
The existing mirror fold button retains full function and overrides the operation of the auto fold module.
Suits all N80 SR models without factory one touch auto window open/close operation.
Once installed to any of the passenger’s window switches, to operate simply tap the existing switch once and the window will fully open or close without the need to keep holding the window switch in position.
Manual operation is still maintained, hold the switch to operate the window and release at any time for the window to stop.
Once fitted to the passenger’s window switch the corresponding window switch on the drivers master window switch becomes full one touch auto for that particular window, enabling the driver to have full one touch auto function at their fingertips in addition to the passenger.
Remove the trim around the factory switch then it’s a simple plug and play installation, just unplug the existing window switch connector and fit the Y patch harness between the factory connector and window switch in place.
Auto Folding P51A Mirror Module suitable for the Ford Ranger & Everest
This module is also fully compatible with the Ford Ranger PX1 to PX3, PU, Everest & Raptor models along with the European and North American Ranger that have the mirror fold button above the mirror adjustment switch.
Module function: Lock doors using the key remote or touch censor on the door handle (if equipped). both mirrors fold in, unlock doors using key remote both mirrors fold back out or turn ignition on mirrors fold out (this is user defined on installation).
Having the ability to fold the vehicles mirrors when locked will greatly reduce the risk of them be damaged by passing cars, cyclist and pedestrians.
The existing mirror fold button retains full function and can override the operation of the P51A module.
Auto Folding Mirror Module suitable for second generation Isuzu D-Max and first generation MU-X
D-Max from 2012 – 2020 (not suitable for the All New D-Max MY21 refer to #P31)
MU-X from 2013 – 2020 (not suitable for the new 2nd generation MU-X refer to #P31B)
This system is suitable for the above vehicles that have the factory mirror fold switch located on the dash
Plug & play harness to the factory mirror switch and only requires connection of up to two wires (using included T taps) to the factory central locking wiring, located in the lower kick panel.
Transforms a single window switch and the corresponding window switch on the drivers master window switch to full one touch auto up/don operation.
Once installed to operate simply tap the existing window switch once and the window will fully open or close without the need to keep holding the window switch in position.
Manual operation is still maintained, hold the switch to operate the window and release at any time for the window to stop.
Frustrated about your vehicles Idle off system turning off the vehicles engine at traffic lights, roundabouts, busy stop start traffic situations or when you least expected it.
Our Idle off eliminator provides a very simple plug & play solution that will disable this factory setting automatically, every time you start the vehicle.
Should you want to reactivate for any particular situation simply push the switch on and the ISS will be implemented until the vehicles ignition is turned off and back on, or you manually press the switch again to deactivate.
Suits both 3.0ltr and 2.2ltr models.
(0 reviews)
AUD$75.00 – AUD$80.00Select options
This product has multiple variants. The options may be chosen on the product page
Isuzu D-MAX MY24 onwards and BT-50 MY25 onwards (excluding BT-50 models that have 360 cameras).
NOTE: The updated facelift MU-X (MY25) with the volume and tune knobs on the front face of the head unit are NOT currently supported with this system.
Our anytime reverse and auxiliary camera system allows you to view the selected camera on the factory head unit once the ignition is on, with a simple push of the included factory styled switch .
In addition to the factory reverse camera two additional video inputs are available so any one of the cameras can be displayed on the factory head unit in any gear, giving you the ability to monitor the tow hitch from the factory reverse camera or a auxiliary camera located on the back of your caravan, work body or even the front of your vehicle, with a simple press of the supplied switch.
(0 reviews)
AUD$595.00Select options
This product has multiple variants. The options may be chosen on the product page
Mohammed Wahba –
It’s working very well for LC300 2022-2024