Auto Up/Down Window Module Suits Toyota Rav4 2013-2018 Fourth generation (XA40)

Code: WMR4

 

Once installed that passenger’s window switch is transformed to full auto one touch up / down, to operate simply tap the existing switch down once and the window will fully open or flick up to close without the need to keep holding the window switch in position, enabling the driver or passenger to have full one touch auto function at their fingertips.

Manual operation is still maintained, hold the switch more than 0.5 seconds to operate the window and release at any time for the window to stop.

NOTE: Not suitable for fitment to the drivers master window switch.

 

AUD$48.00

In stock

In stock

Description

Function: 

Transforms a single passengers window switch to full one touch auto up/down operation and the corresponding switch on the drivers master window switch.

The patch harness is fully 100% direct plug & play connecting to the factory window switch connector, so no splicing or connecting to any individual wires is required.

System includes:

  • Module – Auto up/down one touch window control module
  • Patch harness with full 100% direct plug & play connectors (no splicing wires required)
  • Adhesive pad (hook & loop) to attach module to inside trim.

 

IMPORTANT NOTE: Our system uses current sensing to operate the window regulator, it does not use anti pinch so if an object is encountered between the window and door frame the window will stop. Once the obstruction has been removed the window switch can be reused to continue window movement.

The window lock switch on the master window switch can still be used to isolate the passengers windows from operating.

Operating features: 

  • Hold window switch up or down for manual control

    Window switch functions normally – window stops when the switch is released.

  • Tap the window switch once to initiate full auto window operation

    Window will automatically close / open without the need to keep holding the window switch.

  • When window is opening or closing tap the switch again to pause window.

Installation:

The door trim is not required to be removed.

  • Remove switch fascia using a trim removal tool
  • Disconnect existing factory window switch connector
  • Fit supplied plug and play Y patch harness to the corresponding connectors
  • Afix module to a smooth surface, with provided hook & loop adhesive pad
  • Refit switch fascia.

 

Additional information

Weight 0.075 kg
Dimensions 10 × 8 × 3 cm
Position

Front Passenger, Rear Passenger

Make Model Year
Toyota Rav4 2013 - 2018

Reviews

There are no reviews yet.

Be the first to review “Auto Up/Down Window Module Suits Toyota Rav4 2013-2018 Fourth generation (XA40)”

Your email address will not be published. Required fields are marked *