Central Locking Tailgate System Suits Ford Ranger PX1 PX2 PX3 PU

Code: T1HKIT
(20 customer reviews)

Central locking Tailgate system suits Ford Ranger PX1, PX2, PX3 & PU models, all must have a lockable (key entry) tailgate latch and existing central locking on the fuel release cover.

 

Note: Not suitable for the Next Gen Ford Ranger

 

No splicing into the vehicles electrical system is required this is a 100% true plug & play harness connecting to the existing factory central locking connector that is located behind the fuel release cover.

Uses existing vehicles remote or via the door handle sensor (if equipped).

Laser cut 304 Stainless steel actuator bracket included, so no additional drilling into the vehicles metal tailgate required uses existing mounting fixtures.
Pre-bent actuator rod is also supplied so no additional fabrication required. 

AUD$127.00

In stock

In stock

Description

Features:

  • No soldering or splicing into the existing wiring required, true plug & play
  • Direct connections to the factory wiring and actuator
  • Approximately 3 meters in length
  • Cable is fully protected by convoluted tubing
  • Manufactured here in Australia
  • Cable ties included
  • Torx T30 bit included
  • 3mm Hex shaft drill bit included 
  • High quality actuator with Japanese Mabuchi motor with controlled push/pull force of > 4.0kgs for long term reliability 
  • Housing is made from Nylon & POM is fully sealed with reinforced steel rivets 
  • The head has a full 360° rotation and is fully removable making installation of the included metal rod simple 
  • Laser cut 304 Stainless steel actuator bracket, so no additional drilling into the vehicles metal tailgate required as uses existing mounting fixtures
  • Pre-bent actuator rod so no additional fabrication required
Comprehensive DIY installation instructions provided (via downloadable link just scan the QR code included with the packaging).

Additional information

Weight 0.480 kg
Dimensions 22 × 20 × 6 cm
Make Model Year
Ford Ranger MK1 2011 - 2014
Ford Ranger MK2 2015 - 2018
Ford Ranger MK3 2019 - 2021

20 reviews for Central Locking Tailgate System Suits Ford Ranger PX1 PX2 PX3 PU

  1. Scott Taprell –

    Best mod I have done so far. Easy install, perfect instructions couldn’t rate high enough.

  2. Glenn Bateman –

    Great kit with everything you need including thorough instructions. Easy DIY even for a novice. Highly recommended mod.

  3. Stuart (verified owner) –

    Just fitted my central locking to my Ranger, works perfectly. Instructions were relatively easy to follow. Great job guys, it was just what I wanted.

  4. Michael (verified owner) –

    nice, easy and simple. your mum could install it!

  5. Michael –

    So easy and worth the money, great product 🙂

  6. Robin Delport –

    Nice and Easy Kit with everything you need.. Fantastic piece of gear!

  7. Trent Gardner (verified owner) –

    Works perfectly, easy install. This really should be factory!

  8. David (verified owner) –

    I was reluctant to buy this kit at first being only a fraction of the cost of other kits in the market but glad I did. The kit is very good quality and easy to install with good easy to follow instructions. Works fine and they even supply a drill and torx bits.

  9. Nathan (verified owner) –

    Price is amazing.
    Works an absolute treat!
    Much better then using a key.

  10. Michael –

    Extremely happy
    Highly recommend
    I installed a tailgate remote lock for my new ranger
    Now the tailgate locks and unlocks with the door locks
    Sceptical at first due to the price being much much lower compared to other kits
    Ford quoted $400!!!!
    Thank you for a great product
    Everything included in the kit with simple instructions

  11. Eric (verified owner) –

    Awesome little kit and super easy to install.
    Peace of mind now knowing all the tools i carry on a daily are secured now

  12. Van Dung Pham –

    Easy to follow instructions with everything you need included. i got stuck when locating the plug in the ranger, and they rang and help locate it. Big thanks.

  13. Amtesh (verified owner) –

    It took me couple of hours to install it myself, Scanned barcode on backside of the packet and took me to Instructions page. Instructions were on point. Good quality kit and good customer service as they helped me through email by replying to mine real quick. Ford quoted me 400-500.

  14. John –

    Easy to install with drill and torx supplied, instructions were straightforward. Was sceptical at first because of the price, really happy with prompt delivery, shipping details within an hour of ordering . I live remote and normally have long. Never do reviews but was so pleased with product, price and service felt I had to.

  15. Andrew Johnston –

    The easiest and best kit I’ve ever bought for a car! It fitted exactly as promised and worked exactly as promised. The instructions were clear and concise and easy to follow.
    All the bits needed were inside the kit, and then some.
    Top marks guys!

  16. Jusitn Street (verified owner) –

    This was one of the most satisfying things to install thanks to how well the kit produced. From the fact that all the bits you need to install the product are supplied to the instructions provided, which are perfect, this was a breeze to install. The hardest part was taking the inner guard out but once that is complete the install takes about 45 mins.

    This is a must purchase if you have a ranger. I can not recommend it enough.

  17. Austin (verified owner) –

    Was skeptical at first when I first made contact. Kerry replied that it is easy to install. Bit the bullet and bought it. Glad I did. One of the best installation manual I can think off. Very straight forward. I stalled this over a bottle of beer :).

  18. Julian (verified owner) –

    Honestly such a good kit. Super easy to install and includes everything needed. Works well and looks rigid.

  19. Keith (verified owner) –

    Wonderful kit. Clear instructions and easy to fit to Ranger PX3. Works well.

  20. Steve Tully –

    Wow, so easy to fit. All parts include including tools. Great item for any Ford Ranger owner.
    Have purchased from Trac before and always exceeds expectations in both quality, fitment and technical infor from them. Well done guys

Add a review

Your email address will not be published. Required fields are marked *

Products that also suit

    Auto Accessories

    Auto Close Windows & Folding Mirror Module suits Toyota Fortuna
    Auto close windows and folding mirror module suitable for the Toyota Fortuna models that have one touch auto up/down on all four window switches  this system will close all four windows and fold in mirrors whenever locking the vehicle (accessories mode or ignition needs to be off, windows or mirrors will not close if either are on when locking the vehicle via the lock switch on the armrest) all window switches on the drivers master switch must be all one touch auto up/down.
    Forgetting to close all the windows after you have turned off the ignition or eliminate the possibility that your passenger has left the window down without your knowledge leaving your vehicles contents vulnerable, retains factory window anti-pinch function.
    Is also a great visual indicator that the vehicle is locked when the mirrors are folded in
    Two great functions incorporated in the same module that is fully 100% direct plug & play no splicing into the vehicles electrical system required.

    Lock vehicle both mirrors will fold in and all windows will automatically close if left open, unlock both mirrors will fold back out.

    (0 reviews)
    AUD$145.00 Add to cart
    Auto Accessories

    Auto Folding Mirror Module suits Suzuki Jimny
    Auto folding mirror module suitable for the Suzuki Jimny  2018 – onward models (JB74) including five door XL
     
    Module function: Mirrors will automatically fold in when the vehicle is locked using the remote key fob, allowing full use of the mirrors to safely exit the vehicle on busy roads.
    Unlock doors using key remote both mirrors will fold back out.
    The module can be configured during the installation to unfold the mirrors when the vehicle is unlocked (default) or when the ignition is turned on (user selectable upon installation).
    Having the ability to fold the vehicles mirrors when locked will greatly reduce the risk of them be damaged by passing cars, cyclist and pedestrians.
     
    The existing mirror fold button retains full function and overrides the operation of the PJNY1 module when the vehicles ignition is on.
    (2 reviews)
    AUD$105.00 Add to cart
    Auto Accessories

    Auto Folding Mirror Module Suits Hyundai i20 2010-2015
    Auto Folding Mirror Module suitable for the:
    • Hyundai i20  2010 – 2015
    Module function: Mirrors will fold automatically in when the vehicle is locked using the remote key fob  allowing for full use of the mirrors to safely exit the vehicle on busy roads.
    Unlock doors using key remote both mirrors will fold back out.
    Having the ability to fold the vehicles mirrors when locked will greatly reduce the risk of them be damaged by passing cars, cyclist and pedestrians and is a visual indication that the vehicle has been locked.
    Retain full use of the mirrors to safely exiting the vehicle.
     
    (0 reviews)
    AUD$110.00 Add to cart
    Auto Accessories

    Anytime Reverse – Factory Reverse Camera

    Suitable for Isuzu models from 2011 onwards fitted with a factory reverse camera are compatible, including the All New D-MAX, MU-X models and Mazda BT-50 MY21 to MY24 including the face lift MY24 D-Max.

    Our system allows for simple Plug & Play integration to the existing factory head unit without the need to damage the existing wiring, NO cutting of any factory wiring is required. The included wiring harness is fully terminated so no additional wiring is required simply plug the patch connectors into the factory head unit and supplied dash switch.

    We can also offer the small switch that is located next to the transmission (D-Max My21 to MY23) and if applicable the lower central dash either side of the airbag warning indicator (MU-X MY21 to MY23) that do not have the heated seats) simply select small single switch (AT1-S) in the drop down box.

    Theses switches are a direct replacement with no modification to your trim required.

     

    (0 reviews)
    AUD$70.00 Select options This product has multiple variants. The options may be chosen on the product page
    Auto Accessories

    Auto Window Module Suits Single Cab Nissan Navara D23 NP300

    NOTE: This product is made to order, so addition production time is required.

    Always forgetting to close all the windows after you have removed the keys from the ignition or eliminate the possibility that your passenger’s have the window down without your knowledge leaving your vehicles contents vulnerable.

    This module allows for all windows to be automatically closed every time the vehicle is locked, while still allowing for remote operation using your original key remote to open or close the windows.

    Transforms all the existing window switches on the drivers side to one touch open / close.

    Suitable For:

    Nissan Navara D23 single cab models from 2015 onwards.

    (0 reviews)
    AUD$145.00 Add to cart
    Auto Accessories

    Auto up/down Window Module Suits Toyota Hilux N80 Passengers Window Switch

    Suits all N80 SR models without factory one touch auto window open/close operation.

    Once installed to any of the passenger’s window switches, to operate simply tap the existing switch once and the window will fully open or close without the need to keep holding the window switch in position.

    Manual operation is still maintained, hold the switch to operate the window and release at any time for the window to stop.

    Once fitted to the passenger’s window switch the corresponding window switch on the drivers master window switch becomes full one touch auto for that particular window, enabling the driver to have full one touch auto function at their fingertips in addition to the passenger.

    Remove the trim around the factory switch then it’s a simple plug and play installation, just unplug the existing window switch connector and fit the Y patch harness between the factory connector and window switch in place.

     

    (0 reviews)
    AUD$45.00 Add to cart
-