D-MAX & BT-50 High Brake Light Delete Patch Harness

Code: BLPATCH

When fitting a canopy or service body the rear high brake light should be disconnected to avoid glare in the rear-view mirror every time the brakes are applied.

 

If the rear high brake light lens cannot be removed due to a canopy or service body already in place, or you do not want to disturb the seal between the lens and vehicle body our rear high brake light delete patch harness can be utilised.

AUD$33.00

Out of stock

Description

This patch harness is easily fitted as the connection is inside the vehicle behind the driver’s side kick panel, just disconnect an existing factory connector and fit our high brake light delete patch harness between the two existing factory connectors.

NO factory wires are required to be severed this is completely reversable, should your situation change and the canopy or service body is removed.

Installation:

First remove the plastic skirting on the driver’s door then the plastic kick panel, disconnect existing factory connectors and fit our high brake light delete patch harness between the two existing factory connectors refit trim.

Additional information

Weight 0.050 kg
Dimensions 15 × 5 × 3 cm
Make Model Year
Electrical Universal 2021 - 2024
Isuzu D-Max 2021 - 2024
Mazda BT-50 2021 - 2024

Reviews

There are no reviews yet.

Be the first to review “D-MAX & BT-50 High Brake Light Delete Patch Harness”

Your email address will not be published. Required fields are marked *

Products that also suit

    Electrical

    M12 Four Pin Camera Extension Cable
    M12 Four pin male to M12 four pin female extension cable
    This is the most commonly used M12 four pin extension cable for caravan , camper trailers or where a robust extension cable is required providing power to the camera along with video and audio signals.
    Can be used use with our range of cameras that use the M12 4 pion connection
    (0 reviews)
    AUD$25.00 – AUD$30.00 Select options This product has multiple variants. The options may be chosen on the product page
    Electrical

    Reverse Caravan Camera (dome)

    This camera is ideally suited for vertically mounting on the back of a caravan.

    With a large 1/3 inch colour SONY® CCD sensor providing sharper and higher detail in all light conditions, than standard smaller 1/4 inch colour CMOS sensor cameras.

    Features
    • Ultra low light capability (auto switching to IR at 0Lux (12 IR LEDs)
    • High image quality
    • SONY® CCD image quality
    • Built in microphone
    • IP68 fully encapsulated electronics
    • Reverse mountable
    • Horizontal viewing angel of 120°
    • Fully regulated power supply
    • Housing construction die cast alloy (black powder coated).

     

    (0 reviews)
    AUD$145.00 Add to cart
    Electrical

    Camera Integration System (rectangle camera)

    A complete system including:

    • Camera integration system to view factory reverse and one auxiliary camera on the Isuzu head unit in any gear.
    • x1 10 metre M12 four pin extension cable
    • Quick release coil cord cable with mounting brackets
    • x1 15 metre M12 four pin extension cable
    • Camera (rectangle)

    Optional audio input to AUX factory head unit (select Yes in the option box)

    (0 reviews)
    AUD$465.00 – AUD$485.00 Select options This product has multiple variants. The options may be chosen on the product page
    Electrical

    Reverse Facing Auxiliary Camera

    With a large 1/3 inch colour SONY® CCD sensor providing sharper and higher detail in all light conditions, than standard 1/4 inch colour CMOS sensor cameras, is pendulum mounted.

    Features
    • Ultra low light capability
    • High resolution
    • SONY® CCD image quality
    • IP68 fully encapsulated electronics
    • Reverse mountable (no guide line option)
    • Wide horizontal viewing angel of 170°
    • Fully regulated power supply
    • Housing construction die cast zinc alloy (black powder coated)
    • Steel adjustable bracket.

    Input voltage is fully regulated to ensure a stable video signal across different input voltages.

     

    (0 reviews)
    AUD$77.00 Add to cart
    Electrical

    Reverse Caravan Camera (rectangle)

    This camera is ideally suited for vertically mounting on the back of a caravan.

    With a large 1/3 inch colour SONY® CCD sensor providing sharper and higher detail in all light conditions, than standard smaller 1/4 inch colour CMOS sensor cameras.

    Features
    • Ultra low light capability (auto switching to IR at 0Lux (18 IR LEDs)
    • High resolution
    • SONY® CCD image quality
    • Built in microphone
    • IP68 fully encapsulated electronics
    • Reverse mountable
    • Horizontal viewing angel of 120°
    • Fully regulated power supply
    • Housing construction die cast zinc alloy (black powder coated).

     

    (0 reviews)
    AUD$145.00 Add to cart
    Electrical

    Heavy Duty Quick Release Coiled Cable

    This heavy-duty coil cable enables for a quick connection between the vehicle and caravan/trailer it can be extended up to 1.5mtrs.

    The four pin connectors allow for a single channel video signal along with audio and power (+/-) between the caravan/trailer.

    Supplied as a set:

    Coil cable and two fixed sockets with male and female M12 four pin connectors.

     

    (0 reviews)
    AUD$99.00 Add to cart
-