Description
Specification :
16 pin single male to 16 pin dual female OBD, OBD2 connectors
Overall approximate length is 300 mm
Y Type Flat OBD, OBD2 Y Cable
Net weight 90 grams
Flat OBD OBD2 Y Cable
Additional information
| Weight | 0.090 kg |
|---|---|
| Dimensions | 10 × 5 × 4 cm |
| Make | Model | Year |
|---|---|---|
| Electrical | Universal | 1990 - 2023 |
Products that also suit
-
Auto AccessoriesAuto up/down Window Module Suits Passengers Window Switch
Once installed to any of the passenger’s window switches, to operate simply tap the existing switch once and the window will fully open or close without the need to keep holding the window switch in position.
Manual operation is still maintained, hold the switch to operate the window and release at any time for the window to stop.
Once fitted to the passenger’s window switch the corresponding window switch on the drivers master window switch becomes full one touch auto for that particular window, enabling the driver to have full one touch auto function at their fingertips in addition to the passenger.
Remove the trim around the factory switch then it’s a simple plug and play installation, just unplug the existing window switch connector and fit the Y patch harness between the factory connector and window switch in place.
(1 review) -
Auto AccessoriesAuto Folding Mirror Module suits Toyota Rav4 2019 onward
Auto Folding P81 Mirror Module suitable for the Toyota Rav4 2019 – onward modelsNOTE: GX Models require a different harness to all other models, so ensure you select the correct model in the order drop down boxes.Module function: Mirrors will fold automatically in when the vehicle is locked using the remote key fob or touch panel on the door handle, allowing full use of the mirrors to safely exit the vehicle on busy roads.Unlock doors using key remote or touch panel on the door handle both mirrors will fold back out.The module can be configured during the installation to unfold the mirrors when the vehicle is unlocked (default) or when the ignition is turned on (user selectable upon installation).Having the ability to fold the vehicles mirrors when locked will greatly reduce the risk of them be damaged by passing cars, cyclist and pedestrians.The existing mirror fold button retains full function and overrides the operation of the P81 module when the vehicles ignition is on.(16 reviews)AUD$99.00 Select options This product has multiple variants. The options may be chosen on the product page -
Auto AccessoriesCentral Locking Tailgate System Suits Ford Ranger PX1 PX2 PX3 PU
Central locking Tailgate system suits Ford Ranger PX1, PX2, PX3 & PU models, all must have a lockable (key entry) tailgate latch and existing central locking on the fuel release cover.
Note: Not suitable for the Next Gen Ford Ranger
No splicing into the vehicles electrical system is required this is a 100% true plug & play harness connecting to the existing factory central locking connector that is located behind the fuel release cover.
Uses existing vehicles remote or via the door handle sensor (if equipped).
Laser cut 304 Stainless steel actuator bracket included, so no additional drilling into the vehicles metal tailgate required uses existing mounting fixtures.
Pre-bent actuator rod is also supplied so no additional fabrication required.(20 reviews) -
Auto Accessories
One touch Window Module Suits Triton
Once installed to any of the passenger’s window switches, to operate simply tap the existing switch once and the window will fully open or close without the need to keep holding the window switch in position.
Manual operation is still maintained, hold the switch to operate the window and release at any time for the window to stop.
Once fitted to the passenger’s window switch the corresponding window switch on the drivers master window switch becomes full auto for that particular window, enabling the driver to have full auto function at their fingertips in addition to the passenger.
Installation:
Remove the window switch fascia by first removing the single Phillips screw then inserting a trim tool between the fascia and door panel and prying upwards, then it’s a simple plug and play installation, just unplug the existing window switch connector and fit the Y patch harness between the factory connector and window switch.
(0 reviews) -
Auto AccessoriesCentral Locking Tailgate System Suits Mazda BT-50
Tailgate central locking suits Mazda BT-50 models.
Only fits Mazda BT-50 UR Models that have the key lock within the tailgate handle.
NOTE: Not suitable for the new BT-50 based of the Isuzu platform (refer # T2HKIT)
No splicing into the vehicles electrical system is required this is a 100% true plug & play harness connecting to the existing factory central locking connector that is located behind the fuel release cover.
Laser cut 304 Stainless steel actuator bracket included, so no additional drilling into the vehicles metal tailgate required uses existing mounting fixtures.
Pre-bent actuator rod is also supplied so no additional fabrication required.(1 review) -
Auto AccessoriesCable Mounting Brackets (quick release sockets)
Reverse camera stainless steel mounting bracket(s) to suit quick release coil cable connections.
These are Australian made using 2mm thick 304 grade stainless steel, providing an easy solution for mounting an Aopulo, Sphere or similar reverse camera socket in a suitable location on the vehicle and draw bar on a caravan or trailer.
(0 reviews)AUD$13.00 – AUD$27.50 Select options This product has multiple variants. The options may be chosen on the product page
Reviews
There are no reviews yet.