| Weight | 0.030 kg |
|---|---|
| Dimensions | 10 × 10 × 2 cm |
| Make | Model | Year |
|---|---|---|
| Electrical | Universal | 1990 - 2022 |
This patch harness gets fitted inside the vehicle just above the drivers side kick panel and provides a 12 volt output whenever the vehicles high beam headlights are activated.
No cutting of the factory wiring is required, simply unplug the existing factory connector and fit the patch harness between the factory connectors and then connect the output connector to your existing wiring harness.
This patch harness is also compatible with the D-Max, MU-X and BT-50 models that have factory LED headlights, including the new facelift MY24 D-Max and facelift MY25 MU-X models.
With a large 1/3 inch colour SONY® CCD sensor providing sharper and higher detail in all light conditions, than standard 1/4 inch colour CMOS sensor cameras.
Easy installation as only one small four pin moulded connector (7mm diameter) four meters in length is required to pass through the firewall.
All exposed connections are all within the vehicle (video, power, mirror image and guidelines options) not in the extreme environment of the engine bay or under the rear of the vehicle.
Changing image from forward or reverse facing or adding guidelines is just a matter of cutting small, looped wires that are also located within the vehicle.
Input voltage is fully regulated to ensure a stable video signal across different input voltages and is again located within the vehicle.
Compatible with the new facelift MY24 D-Max, fitted with LED headlights that uses the new eight pin connector.
No cutting of the factory wiring is required, simply unplug the existing factory connector and fit the patch harness.
Then connect the output connector to your existing wiring harness (a range of connectors to suit popular lighting brands are available).
This heavy-duty coil cable enables for a quick connection between the vehicle and caravan/trailer it can be extended up to 1.5mtrs.
The four pin connectors allow for a single channel video signal along with audio and power (+/-) between the caravan/trailer.
Supplied as a set:
Coil cable and two fixed sockets with male and female M12 four pin connectors.
Reviews
There are no reviews yet.