D-MAX, MU-X & BT-50 Headlight Patch Harness

Code: MUXPATCH

This patch harness gets fitted inside the vehicle just above the drivers side kick panel  and provides a 12 volt output whenever the vehicles high beam headlights are activated.

No cutting of the factory wiring is required, simply unplug the existing factory connector and fit the patch harness between the factory connectors and then connect the output connector to your existing wiring harness.

This patch harness is also compatible with the D-Max and BT-50 models that have factory LED headlights.

 

AUD$33.00

In stock

In stock

Description

Single connector and terminal included so you can connect to your wiring harness.
Additional wiring options including low beam and running light pick up are made to order we can also supply factory style switch, even if you do not have any switch blank locations remaining on the right hand side of the steering we have a solution, just send us an email with your requirements.
If you require a patch harness that fits directly into the head light within the engine bay refer here

Additional information

Weight 0.050 kg
Dimensions 15 × 5 × 3 cm
Make Model Year
Electrical Universal 2021 - 2024
Isuzu D-Max 2021 - 2023
Isuzu MU-X 2021 - 2023
Mazda BT-50 2021 - 2023

Reviews

There are no reviews yet.

Be the first to review “D-MAX, MU-X & BT-50 Headlight Patch Harness”

Your email address will not be published. Required fields are marked *

Products that also suit

    Electrical

    Reverse Caravan Camera (rectangle)

    This camera is ideally suited for vertically mounting on the back of a caravan.

    With a large 1/3 inch colour SONY® CCD sensor providing sharper and higher detail in all light conditions, than standard smaller 1/4 inch colour CMOS sensor cameras.

    Features
    • Ultra low light capability (auto switching to IR at 0Lux (18 IR LEDs)
    • High resolution
    • SONY® CCD image quality
    • Built in microphone
    • IP68 fully encapsulated electronics
    • Reverse mountable
    • Horizontal viewing angel of 120°
    • Fully regulated power supply
    • Housing construction die cast zinc alloy (black powder coated).

     

    (0 reviews)
    AUD$145.00 Add to cart
    Electrical

    Camera Integration System (dome camera)

    A complete system including:

    • Camera integration system to view factory reverse and one auxiliary camera on the Isuzu head unit in any gear.
    • x1 10 metre M12 four pin extension cable
    • Quick release coil cord cable with mounting brackets
    • x1 15 metre M12 four pin extension cable
    • Camera (dome)

    Optional audio input to AUX factory head unit

    (0 reviews)
    AUD$465.00 – AUD$485.00 Select options
    Electrical

    Heavy Duty Quick Release Coiled Cable

    This heavy-duty coil cable enables for a quick connection between the vehicle and caravan/trailer it can be extended up to 1.5mtrs.

    The four pin connectors allow for a single channel video signal along with audio and power (+/-) between the caravan/trailer.

    Supplied as a set:

    Coil cable and two fixed sockets with male and female M12 four pin connectors.

     

    (0 reviews)
    AUD$99.00 Add to cart
    Electrical

    Reverse Facing Auxiliary Camera

    With a large 1/3 inch colour SONY® CCD sensor providing sharper and higher detail in all light conditions, than standard 1/4 inch colour CMOS sensor cameras.

    Features
    • Ultra low light capability
    • High resolution
    • SONY® CCD image quality
    • IP68 fully encapsulated electronics
    • Reverse mountable (no guide line option)
    • Wide horizontal viewing angel of 170°
    • Fully regulated power supply
    • Housing construction die cast zinc alloy (black powder coated)
    • Steel adjustable bracket.

    Input voltage is fully regulated to ensure a stable video signal across different input voltages.

     

    (0 reviews)
    AUD$77.00 Add to cart
    Electrical

    M12 Four Pin Camera Extension Cable
    M12 Four pin male to M12 four pin female extension cable
    This is the most commonly used M12 four pin extension cable for caravan , camper trailers or where a robust extension cable is required providing power to the camera along with video and audio signals.
    Can be used use with our range of cameras that use the M12 4 pion connection
    (0 reviews)
    AUD$25.00 – AUD$30.00 Select options
    Electrical

    HD Reverse Facing Auxiliary Camera with Guide Lines

    This camera is ideally suited for undertray mounting and has fixed guide lines incorporated.

    With a large 1/3 inch colour SONY® CCD sensor providing sharper and higher detail in all light conditions, than standard 1/4 inch colour CMOS sensor cameras.

    Features
    • Ultra low light capability
    • High resolution
    • SONY® CCD image quality
    • IP68 fully encapsulated electronics
    • Reverse mountable
    • Fixed guide lines visible
    • Wide horizontal viewing angel of 170°
    • Fully regulated power supply
    • Housing construction die cast zinc alloy (black powder coated)
    • Steel adjustable bracket.

    Input voltage is fully regulated (6 – 24v) to ensure a stable video signal across different input voltages.

     

    (0 reviews)
    AUD$77.00 Add to cart
-