Camera Integration System (dome camera)

Description

Anytime Reverse – Dual Inputs

Our system allows for simple Plug & Play integration to the existing factory head unit without the need to damage the existing wiring, NO cutting of any factory wiring is required. The included wiring harness is fully terminated so no additional wiring is required (excluding the auxiliary camera being fitted) simply plug the patch connectors into the factory head unit and supplied dash switch.

A factory styled dual input switch is provided that fits into an existing switch location on the upper dash, to view the factory reverse camera on the head unit press the top switch, to change between the two video inputs (auxiliary camera) press the bottom switch.

When the top switch is in the off position the selected camera will only be displayed on the factory head unit, once the reverse gear has been selected this can be either camera (user selectable via the bottom switch).

• Our system is fully Plug & Play zero modification to the factory wiring is required – no cutting or splicing wires required during installation, simply fit our patch harness between the existing factory connectors
• Factory styled dual switch is provided for seamless integration to your dash, this turns on the screen and switches camera views
• Navigation, radio, Bluetooth, Android Auto & Apple Car Play audio is uninterrupted when the switches are in the on position
• Video inputs & output are standard RCA connections and M12 (GX12) four pin male adaptor
• Optional audio input is via the 3.5mm jack located below the head unit
• NOTE: The factory head unit uses standard definition NTSC TV system so only standard definition NTSC cameras are compatible; cameras using the PAL TV system or being high definition are not suitable
• The factory head unit is required to be removed before installation
• Tools required – Trim tools (included) and a Phillips PH1 screwdriver
• Auxiliary standard definition NTSC camera is included 
• Installation instructions are included via the QR code on the front of the packaging.

Components included:

# AT2-4PIN or #AT2-4PINAV Camera integration system to view factory reverse and one auxiliary camera on the Isuzu head unit in any gear.

# M12EXT10 x1 10 metre M12 four pin extension cable.

#CCABLE Quick release coil cord cable.

# CCB mounting brackets.

# M12EXT15 x1 15 metre M12 four pin extension cable.

# CCD120D Dome camera.

# TRIMSET Five piece trim removal set.

If you want the option to hear the included cameras microphone on the vehicles radio (when viewing on the factory head unit) select yes in the drop down option box.