Description
M12 4Pin screw on cover
Specification:
- Metal cap
- Inner rubber seal
- Metal chain 60mm in length
- 7mm diameter split ring
M12 Screw Cap
Additional information
| Weight | 0.05 kg |
|---|---|
| Dimensions | 3 × 3 × 2 cm |
| Make | Model | Year |
|---|---|---|
| Electrical | Universal | 1990 - 2022 |
Products that also suit
-
ElectricalHeavy Duty Quick Release Coiled Cable
This heavy-duty coil cable enables for a quick connection between the vehicle and caravan/trailer it can be extended up to 1.5mtrs.
The four pin connectors allow for a single channel video signal along with audio and power (+/-) between the caravan/trailer.
Supplied as a set:
Coil cable and two fixed sockets with male and female M12 four pin connectors.
(0 reviews) -
ElectricalReverse Caravan Camera (rectangle)
This camera is ideally suited for vertically mounting on the back of a caravan.
With a large 1/3 inch colour SONY® CCD sensor providing sharper and higher detail in all light conditions, than standard smaller 1/4 inch colour CMOS sensor cameras.
Features- Ultra low light capability (auto switching to IR at 0Lux (18 IR LEDs)
- High resolution
- SONY® CCD image quality
- Built in microphone
- IP68 fully encapsulated electronics
- Reverse mountable
- Horizontal viewing angel of 120°
- Fully regulated power supply
- Housing construction die cast zinc alloy (black powder coated).
(0 reviews) -
ElectricalD-MAX, MU-X & BT-50 Headlight Patch Harness
This patch harness gets fitted inside the vehicle just above the drivers side kick panel and provides a 12 volt output whenever the vehicles high beam headlights are activated.
No cutting of the factory wiring is required, simply unplug the existing factory connector and fit the patch harness between the factory connectors and then connect the output connector to your existing wiring harness.
This patch harness is also compatible with the D-Max and BT-50 models that have factory LED headlights, including the new facelift MY24 D-Max.
(0 reviews) -
Sale!
ElectricalMU-X (Second Generation) Headlight Patch Harness
Second generation MU-X headlight patch harness (08/2021 onwards)
No cutting of the factory wiring is required, simply unplug the existing factory connector and fit the patch harness.
Then connect the output connector to your existing wiring harness (a range of connectors to suit popular lighting brands are available).
(0 reviews) -
ElectricalM12 4 Pin to RCA Adaptor
M12 4Pin aviation male connector to male RCA connector and 12v positive and negative connections(0 reviews) -
ElectricalTrim tools (five piece set)
Trim tools – five piece set
Made from POM material (chemically known as Polyoxymethylene) has a high mechanical strength and rigidity suitable for removing a range plastic trim and radio fascia’s.
(0 reviews)
Reviews
There are no reviews yet.