Reverse Caravan Camera (dome)

Code: CCD120D
Reverse Caravan Camera (dome)
Reverse Caravan Camera (dome) - Image 2

This camera is ideally suited for vertically mounting on the back of a caravan.

With a large 1/3 inch colour CCD sensor providing sharper and higher detail in all light conditions, than standard smaller 1/4 inch colour CMOS sensor cameras.

Features
  • Ultra low light capability (auto switching to IR at 0Lux (12 IR LEDs)
  • CCD image quality
  • IP68 fully encapsulated electronics
  • Reverse mountable
  • Horizontal viewing angel of 120°
  • Fully regulated power supply
  • Housing construction die cast alloy (black powder coated).

 

AUD$130.00

In stock

In stock

Description

Heavy duty auxiliary reverse camera  suitable for mounting vertically.

SPECIFICATIONS

Sensor 1/3 inch colour CCD
Signal CVBS
TV System Standard Definition NTSC
Resolution 480 TV lines
Effective pixels 768 (h) x 494 (v)
Viewing angle – diagonal 120°
Viewing angle – horizontal 120°
Waterproof rating IP67
Lens optics Glass
Operating temperature -20°C – +70°C
Video output: 1.0vp-p,750hm
White balance Auto
Automatic gain control (AGC) Auto
Rated voltage 12V DC
IR LEDs 12pcs
Power consumption 1 Watt
Microphone No
Camera connector M12 four pin
Camera input cable length 470mm
Housing construction Cast aluminium
Dimensions (camera body) 82mm (flange diameter) x 72mm (height)
Weight including bracket and cable 245 grams
M12 Connector pin functions
  • Pin 1 – 12v positive
  • Pin 2 – Negative
  • Pin 3 – N/A
  • Pin 4 – Video signal

Camera selectable functions – None

Fixed reverse facing only non changeable, without guidelines

Contents

  • Dome Reverse Camera
  • Gasket
  • Grommet (fitted to M12 four pin cable)

 

Warranty

One year

Additional information

Weight 0.285 kg
Dimensions 10 × 10 × 8 cm
Viewing Angle

120°
Make Model Year
Electrical Universal 1990 - 2026

Reviews

There are no reviews yet.

Be the first to review “Reverse Caravan Camera (dome)”

Your email address will not be published. Required fields are marked *


Products that also suit

  • MU-X MY25 Facelift Headlight Patch Harness
    Electrical

    MU-X MY25 Facelift Headlight Patch Harness

    Compatible with the new facelift MY25 MU-X LED headlights that uses the twelve pin connector.

     

     

     

     

    (0 reviews)
    AUD$33.00 Add to cart
  • Sale! Heavy Duty Quick Release Coiled Cable
    Electrical

    Heavy Duty Quick Release Coiled Cable

    This heavy-duty coil cable enables for a quick connection between the vehicle and caravan/trailer it can be extended up to 1.5mtrs.

    The four pin connectors allow for a single channel video signal along with audio and power (+/-) between the caravan/trailer.

    Supplied as a set:

    Coil cable and two fixed sockets with male and female M12 four pin connectors.

     

    (0 reviews)
    Original price was: AUD$99.00.Current price is: AUD$88.00. Add to cart
  • D-MAX SX Headlight Patch Harness
    Electrical

    D-MAX SX Headlight Patch Harness

    Compatible with the MY21-MY23 (pre facelift) halogen headlights that uses the four pin connector.

     

     

     

     

    (0 reviews)
    AUD$33.00 Add to cart
  • M12 4 Pin to factory 4 pin reverse camera connector
    Electrical

    M12 4 Pin to factory 4 pin reverse camera connector
    Ideal for when removing the tub and fitting a tray, this adaptor allows for a plug and play solution when adding our CCD170HDG camera that have guidelines incorporated within the camera or CCD170HD camera (without guidelines).
    (0 reviews)
    AUD$35.00 Add to cart
  • D-MAX & BT-50 High Brake Light Delete Patch Harness
    Electrical

    D-MAX & BT-50 High Brake Light Delete Patch Harness

    When fitting a canopy or service body the rear high brake light should be disconnected to avoid glare in the rear-view mirror every time the brakes are applied.

     

    If the rear high brake light lens cannot be removed due to a canopy or service body already in place, or you do not want to disturb the seal between the lens and vehicle body our rear high brake light delete patch harness can be utilised.

    (0 reviews)
    AUD$33.00 Add to cart
  • Interior LED Lights suits 4th Gen Suzuki Jimny
    Electrical

    Interior LED Lights suits 4th Gen Suzuki Jimny

    A direct replacement LED SMD (surface mounted diode) panel has been designed to fit seamlessly into the forth generation Suzuki Jimny (JB64W, JB74W) models from 2018 to current interior light fixtures.

    These replace the standard factory bulbs without any modifications to the interior light fixtures providing a higher light output.

    Sold as a set (front and back).

    (0 reviews)
    AUD$22.00 Add to cart
-