Shop
Showing 10–18 of 124 results
-
ElectricalD-MAX & BT-50 High Brake Light Delete Patch Harness
When fitting a canopy or service body the rear high brake light should be disconnected to avoid glare in the rear-view mirror every time the brakes are applied.
If the rear high brake light lens cannot be removed due to a canopy or service body already in place, or you do not want to disturb the seal between the lens and vehicle body our rear high brake light delete patch harness can be utilised.
(0 reviews) -
Auto AccessoriesAuto Window & Mirror Module Suits Suzuki Swift
Auto Folding and Window Module suitable for the Suzuki Swift 2020-2024Two great functions incorporated in the same module that is fully 100% direct plug & play no splicing into the vehicles central locking wires required.
Once the vehicle is locked using the key remote or button on the door handle the side mirrors fold in and fold back once the vehicle is unlocked using the key remote (models with factory fitted electric folding mirrors).
Always forgetting to close all the windows after you have removed the keys from the ignition or eliminate the possibility that your passenger’s have left the rear windows down without your knowledge leaving your vehicles contents vulnerable.
This module allows for all windows to be automatically closed every time the vehicle is locked using the key remote, while still allowing for remote operation using your original key remote to open or close the windows.
Transforms all the existing window switches on the drivers side to one touch open / close.
(0 reviews) -
Auto AccessoriesAuto up/down Window Module Suits N70 Hilux Passengers Window Switch
Suits all N70 models with manual window switches.
Once installed to any of the passenger’s window switches, to operate simply tap the existing switch once and the window will fully open or close without the need to keep holding the window switch in position.
Manual operation is still maintained, hold the switch to operate the window and release at any time for the window to stop.
Once fitted to the passenger’s window switch the corresponding window switch on the drivers master window switch becomes full one touch auto for that particular window, enabling the driver to have full one touch auto function at their fingertips in addition to the passenger.
Remove the trim around the factory switch then it’s a simple plug and play installation, just unplug the existing window switch connector and fit the Y patch harness between the factory connector and window switch in place.
(0 reviews) -
-
ElectricalD-MAX, MU-X & BT-50 Headlight Patch Harness
This patch harness gets fitted inside the vehicle just above the drivers side kick panel and provides a 12 volt output whenever the vehicles high beam headlights are activated.
No cutting of the factory wiring is required, simply unplug the existing factory connector and fit the patch harness between the factory connectors and then connect the output connector to your existing wiring harness.
This patch harness is also compatible with the D-Max and BT-50 models that have factory LED headlights, including the new facelift MY24 D-Max.
(0 reviews) -
Auto AccessoriesDual Switches Suitable for 2nd Gen MU-X
Free up additional switch locations with a range of replacement dual switches that combine factory switch functions, suitable for the second generation Isuzu MU-X models from 2021-onwards.
Theses switches are a direct replacement simple plug & play integration with no modification to your trim or factory wiring required.
(0 reviews)AUD$55.00 – AUD$110.00 Select options This product has multiple variants. The options may be chosen on the product page -
Auto AccessoriesDual Switch (Traction Control off and Hill Descent switch)
Suitable for the first generation MU-X models
Low on switch locations, this dual switch combines the factory ESC / Traction Control Off and Hill Descent Control switch into a single switch location.
(0 reviews) -
Auto AccessoriesDual Switch (Hands-free off and Fan switch)
Suitable for the MU-X models that have the factory Hands Free Off switch option.
Low on switch locations, this dual switch combines the factory Hands-Free off switch and the rear Fan functions into a single switch location.
Replaces the two separate factory switches with one dual function switch and is a direct replacement, no changes or modifications to the factory wiring required.
Simply unplug the factory connectors remove the factory switches and connect the supplied harness and dual switch.
The dual switch illumination is fully dimmable via the factory dimmer switch.
(0 reviews) -
Auto AccessoriesAnytime Reverse & Traction Control Switch
Suitable for the All New Isuzu D-MAX and Mazda BT-50 MY21 onwards models including the face lift MY24 D-Max.
Our system allows for simple plug & play no cutting of any of the factory wiring is required ,the head unit is not required to be removed.
The included wiring harness is fully terminated so no additional wiring is required simply plug the patch harness in between the factory wiring and the supplied dual switch, that incorporates the anytime camera activation and Traction Control functions.
(0 reviews)
