| Weight | 0.120 kg |
|---|---|
| Dimensions | 16 × 50 × 50 cm |
| Make | Model | Year |
|---|---|---|
| Electrical | Universal | 1990 - 2022 |
This camera is ideally suited for vertically mounting on the back of a caravan.
With a large 1/3 inch colour SONY® CCD sensor providing sharper and higher detail in all light conditions, than standard smaller 1/4 inch colour CMOS sensor cameras.
Made from POM material (chemically known as Polyoxymethylene) has a high mechanical strength and rigidity suitable for removing a range plastic trim and radio fascia’s.
When fitting a canopy or service body the rear high brake light should be disconnected to avoid glare in the rear-view mirror every time the brakes are applied.
If the rear high brake light lens cannot be removed due to a canopy or service body already in place, or you do not want to disturb the seal between the lens and vehicle body our rear high brake light delete patch harness can be utilised.
No cutting of the factory wiring is required, simply unplug the existing factory connector and fit the patch harness.
Then connect the output connector to your existing wiring harness (a range of connectors to suit popular lighting brands are available).
This heavy-duty coil cable enables for a quick connection between the vehicle and caravan/trailer it can be extended up to 1.5mtrs.
The four pin connectors allow for a single channel video signal along with audio and power (+/-) between the caravan/trailer.
Supplied as a set:
Coil cable and two fixed sockets with male and female M12 four pin connectors.
Reviews
There are no reviews yet.