Description
Module Function:
Transforms a single passengers window switch and the corresponding window switch on the drivers master window switch to full one touch auto open/close operation, providing one touch windows from both the passenger’s window switch and the corresponding window switch on the drivers master window switch.
Can be used in conjunction with our existing auto window systems or as a standalone unit.
The patch harness is fully 100% direct plug & play connecting to the factory window switch connector, so no splicing or connecting to any individual wires is required.
System includes:
- WM9 Module – Auto window control module (one module required for each passengers window switch)
- Y patch harness with full 100% direct plug & play connectors (no splicing wires required)
- Adhesive pad (hook & loop) to attach module to inside trim
Operating features:
- Hold window switch up or down for manual control from the passengers or drivers master window switch
Window switch functions normally – window stops when the switch is released.
- Tap the window switch once to initiate full auto window operation from the passengers or corresponding drivers master window switch
Window will automatically close / open without the need to keep holding the window switch.
- Compatible with our auto window and auto window and mirror modules
All window functions are maintained when remotely opening or closing the windows from partially open to fully opening or closing.
Installation:
Remove the switch fascia for the X-Trail (T32) , for the NP300 (D23) partially remove the door panel to gain access to the underside of the window switch then it’s a simple plug and play installation, just unplug the existing window switch connector and fit the Y patch harness between the factory connector and window switch.
Suits:
Nissan X-Trail (T32)
Nissan NP300 (D23)
Nissan Qashqai (J11)
Subaru Outback (5th Gen)
NOTE: Suitable for both left and right hand drive vehicles, both single and dual cab models.
Reviews
There are no reviews yet.