Camera Integration System

Code: AT-2
(2 customer reviews)

Suits:

: Isuzu D-MAX and MU-X models from 2011 to 2023/24 fitted with a factory screen incorporating a reverse camera are compatible.

: BT-50 models (Isuzu platform) up to MY23

NOTE: The updated facelift D-Max (MY24 models) with the Volume and Tune knobs on the front face of the head unit and Mazda’s 11-inch screen are NOT currently compatible with this system.

In addition to the factory reverse camera a second auxiliary video input is available so either of the cameras can be displayed on the factory head unit in any gear, giving you the ability to monitor the tow hitch from the factory reverse camera or a auxiliary camera located on the back of your caravan or even the front of your vehicle, with a simple press of the switch.

If one auxiliary camera is not enough, we can make to order a two auxiliary cameras and retain the factory reverse camera giving you – front, factory reverse rear and caravan/camper system just send us an email with your requirements.

 

AUD$175.00 – AUD$252.00

In stock

Description

 

Anytime Reverse – Dual Inputs

Our system allows for simple Plug & Play integration to the existing factory head unit without the need to damage the existing wiring, NO cutting of any factory wiring is required. The included wiring harness is fully terminated so no additional wiring is required (excluding your auxiliary camera being fitted) simply plug the patch connectors into the factory head unit and supplied dash switch.

A factory styled dual input switch is provided that fits into an existing switch location on the upper dash, to view the factory reverse camera on the head unit press the top switch, to change between the two video inputs (second auxiliary camera) press the bottom switch.

When the top switch is in the off position the selected camera will only be displayed on the factory head unit, once the reverse gear has been selected this can be either camera (user selectable via the bottom switch).

12 volt switched power is provided and a female RCA connector for the input video signal for connection of your auxiliary camera as standard, there is now an option to purchase a M12 4 pin connector that incorporates power and video. When selected from this product page the additional cost also includes fitment to the supplied wiring harness so no additional wiring is required, simply screw on your M12 extension cable.

 

  • Our system is fully Plug & Play zero modification to the factory wiring is required – no cutting or splicing wires required during installation, simply fit our patch harness between the existing factory connectors
  • Factory styled dual switch is provided for seamless integration to your dash
  • Navigation, radio, Bluetooth, Android Auto & Apple Car Play audio is uninterrupted when the switches are in the on position
  • Video inputs & output are standard RCA connections (M12) four pin male adaptor for auxiliary camera input option available 200mm in length)
  • Audio input is via the 3.5mm jack when using our part # AT2-4PINAV (your camera must have a microphone)
  • NOTE: The factory head unit uses standard definition NTSC TV system so only standard definition NTSC cameras are compatible; cameras using the PAL TV system or being high definition AHD are not suitable and will result in the screen turning off (blank)
  • The factory head unit is required to be removed before installation
  • Tools required – Trim tools and a Phillips PH1 screwdriver
  • Additional trim clips included
  • For 12 volt camera systems, if auxiliary camera exceeds 2 amps a relay must be used
  • Second auxiliary camera is not included 
  • Installation instructions are included via the QR code on the front of the packaging.

There are five options to select from dependant on requirements and existing hardware you have, the first two options are suitable for caravan installations.

  • AT2-4PIN (M12 4 pin connector) This option is if you have an existing caravan system using the common M12 four pin connector, allowing for direct connection to our camera integration system
  • AT2-4PINAV (M12 4 pin connector) This option is if you have an existing caravan system using the common M12 four pin connector with the addition of an audio input (your camera must have a microphone), allowing for direct connection to our camera integration system and the audio input (3.5mm jack) of the head unit.
  • AT2 (RCA connector) This option is if you have an existing camera that uses an RCA connector, allowing for direct connection to our camera integration system
  • AT2 (RCA connector + Camera CCD150°) This option includes a camera with a horizontal viewing Angle of 150°
  • AT2 (RCA connector + Camera CCD170°) This option includes a camera with a horizontal viewing Angle of 170°

For full product and specifications information on theses cameras refer here

For a heavy duty compact reverse facing camera using the M12 4 pin connector refer here

No cabling to the back of the vehicle is included, for additional cabling, trim tools and accessory options refer here

Our anytime reverse and auxiliary camera system allows you to view your selected camera at any time with a simple push of the included factory styled switch on the factory head unit.

Our harnesses will plug directly into the back of your factory head unit with NO cutting or modification to the existing factory wires required!

Once the patch harnesses are connected, simply connect the harness to the included factory style switch.

 

Additional information

Weight 0.25 kg
Dimensions N/A
Make Model Year
Isuzu D-Max 2011 - 2023
Isuzu D-Max LS-M 2021 - 2023
Isuzu D-Max LS-U 2021 - 2023
Isuzu D-Max MU-X 2012 - 2024
Isuzu D-Max SX 2021 - 2023
Isuzu D-Max X-Terrain 2021 - 2023
Isuzu MU-X 2013 - 2023
Isuzu MU-X LS-M 2021 - 2024
Isuzu MU-X LS-T 2021 - 2024
Isuzu MU-X LS-U 2021 - 2024
Mazda BT-50 2021 - 2023
Mazda BT-50 GT 2021 - 2023
Mazda BT-50 XTR 2021 - 2023

2 reviews for Camera Integration System

  1. JG –

    I got this model so that:
    A. I could have a forward facing (front grill) camera. For parking clearance and 4WDing clearance;
    B. I could turn on the factory fitted camera anytime. For 4WDing, hitch and load checking; and
    C. I could have a high rear vehicle (roof top platform) or caravan connect camera with sound. For 4WDing, reversing and caravan driving always on if needed.
    All through the vehicle standard head unit, 2 button slots used down drivers right hand side & media cable plugin for rear sound.
    It all just works with a push selection of the camera select button.
    Integrated instillation is especially helpful since there is limited dash, windscreen or console space to put anything due to airbag or Isuzu sensor locations.

  2. Peter McKill (verified owner) –

    Had ours installed in May 2022 along with mirror/windows module. Car was only 2 days old. I have to say both are terriffic units. Keeps everything neatly out of the way. I highly recommend the product

Add a review

Your email address will not be published. Required fields are marked *

Products that also suit

    Auto Accessories

    Auto Folding Mirror Module Suits Isuzu D-Max (without factory fold option)

    Auto Folding Mirror Module suitable for the all new 3rd Generation Isuzu D-Max MY21 – onwards.

    Once electric folding mirrors have been fitted (not included) this system will allow them to be controlled with the central locking circuit so they close on lock and reopen on unlock and an additional dash mounted switch is included, so they can be operated when the ignition is on.

    (0 reviews)
    AUD$135.00 Add to cart
  • Auto Accessories

    Auto Folding Mirror Module Suits Nissan Navara D23 ST-X King Cab models
    Module function: Mirrors will fold automatically in when the vehicle is locked using the remote key fob or button on the door handle allowing for full use of the mirrors to safely exit the vehicle on busy roads. unlock doors both mirrors will fold back out.
    Having the ability to fold the vehicles mirrors when locked will greatly reduce the risk of them be damaged by passing cars, cyclist and pedestrians and is a great visual indication that the vehicle has been locked.
    Retain full use of the mirrors to safely exiting the vehicle.
     
    The existing mirror fold button retains full function and overrides the operation of the module when the vehicles ignition is on.

    Suitable For:

    Nissan Navara D23 ST-X King Cab models from 2015 onwards that have the factory fitted electric folding mirrors.

    (0 reviews)
    AUD$110.00 Add to cart
  • Auto Accessories

    Auto Window Module Suits All New Isuzu D-Max MY21-24

    Always forgetting to close all the windows after you have removed the keys from the ignition or eliminate the possibility that your passenger’s have left the rear windows down without your knowledge leaving your vehicles contents vulnerable.

    This module allows for all windows to be automatically closed every time the vehicle is locked using the key remote, button on the door handle (on applicable models) while still allowing for remote operation using your original key remote to open or close the windows.

    Models with proximity locking the windows will close when the vehicle automatically locks.

    Transforms all the existing window switches on the drivers side to one touch open / close.

     

    (0 reviews)
    AUD$135.00 Add to cart
    Auto Accessories

    Dual Switch (Traction Control off and Hill Descent switch)

    Suitable for the first generation MU-X models

    Low on switch locations, this dual switch combines the factory ESC / Traction Control Off and Hill Descent Control switch into a single switch location.

     

     

     

     

    (0 reviews)
    AUD$55.00 Add to cart
    Auto Accessories

    Auto Window & Mirror Module Suits MY21-24 MU-X

    Two great functions incorporated in the same module that is fully 100% direct plug & play no splicing into the vehicles central locking wires required.

    Once the vehicle is locked using the key remote or sensor on the door handle the side mirrors fold in and fold back once the vehicle is unlocked using the key remote or sensor on the door handle (models with factory fitted electric folding mirrors).

    Models with proximity locking, the mirrors will also fold in and any open windows will close when the vehicle automatically locks.

    Always forgetting to close all the windows after you have removed the keys from the ignition or eliminate the possibility that your passenger’s have left the rear windows down without your knowledge leaving your vehicles contents vulnerable.

    This module allows for all windows to be automatically closed every time the vehicle is locked using the key remote, while still allowing for remote operation using your original key remote to open or close the windows.

    Transforms all the existing window switches on the drivers side to one touch open / close.

    Suits both LS-U and LS-T MU-X models fitted with electric folding mirrors.

    (3 reviews)
    AUD$160.00 Add to cart
    Auto Accessories

    Auto Window & Mirror Switch Module Suits Nissan Navara D23 NP300

    Two great functions incorporated into this full replacement master window switch module.

    Always forgetting to close all the windows after you have removed the keys from the ignition or eliminate the possibility that your passenger’s have left the rear windows down without your knowledge leaving your vehicles contents vulnerable.

    NOTE: This model is only suitable for Australian and New Zealand NP300 models as other countries use a different connection for the door lock actuator so a plug and play patch harness is not available.

    (2 reviews)
    AUD$185.00 Add to cart
-