Camera Integration System Suits Isuzu D-MAX & MU-X

Code: AT-2


: Isuzu models from 2011 onwards fitted with a factory screen incorporating a reverse camera are compatible, including the All New D-MAX and MU-X models.

: Mazda BT-50 MY21 onwards.

In addition to the factory reverse camera a second auxiliary video input is available so either of the cameras can be displayed on the factory head unit in any gear, giving you the ability to monitor the tow hitch from the factory reverse camera or a auxiliary camera located on the back of your caravan or even the front of your vehicle, with a simple press of the switch.




In stock



Anytime Reverse – Dual Inputs

Our system allows for simple Plug & Play integration to the existing factory head unit without the need to damage the existing wiring, NO cutting of any factory wiring is required. The included wiring harness is fully terminated so no additional wiring is required (excluding your auxiliary camera being fitted) simply plug the patch connectors into the factory head unit and supplied dash switch.

A factory styled dual input switch is provided that fits into an existing switch location on the upper dash, to view the factory reverse camera on the head unit press the top switch, to change between the two video inputs (second auxiliary camera) press the bottom switch.

When the top switch is in the off position the selected camera will only be displayed on the factory head unit, once the reverse gear has been selected this can be either camera (user selectable via the bottom switch).

12 volt switched power is provided and a female RCA connector for the input video signal for connection of your auxiliary camera as standard, there is now an option to purchase a M12 4 pin connector that incorporates power and video. When selected from this product page the additional cost also includes fitment to the supplied wiring harness so no additional wiring is required, simply screw on your M12 extension cable.


  • Our system is fully Plug & Play zero modification to the factory wiring is required – no cutting or splicing wires required during installation, simply fit our patch harness between the existing factory connectors
  • Factory styled dual switch is provided for seamless integration to your dash
  • Navigation, radio, Bluetooth, Android Auto & Apple Car Play audio is uninterrupted when the switches are in the on position
  • Video inputs & output are standard RCA connections (M12 (GX12) four pin male adaptor for auxiliary camera input option available 200mm in length)
  • NOTE: The factory head unit uses the NTSC video system so only NTSC cameras are compatible; cameras using the PAL TV system are not suitable
  • The factory head unit is required to be removed before installation
  • Tools required – Trim tools and a Phillips PH1 screw driver
  • For 12 volt camera systems, if auxiliary camera exceeds 2 amps a relay must be used
  • Second auxiliary camera is not included (we now offer a camera option, if using this camera select AT2 system – Standard RCA connector)
  • Installation instructions are included via the QR code on the front of the packaging.

There are four options to select from dependant on requirements and existing hardware you have:

  • AT2-4PIN (M12 4 pin connector) This option is if you have an existing caravan system using the common M12 four pin connector, allowing for direct connection to our camera integration system
  • AT2 (RCA connector) This option is if you have an existing camera that uses an RCA connector, allowing for direct connection to our camera integration system
  • AT2 (RCA connector + Camera CCD150°) This option includes a camera with a horizontal viewing Angle of 150°
  • AT2 (RCA connector + Camera CCD170°) This option includes a camera with a horizontal viewing Angle of 170°

For full product and specifications information on theses cameras refer here

For additional cabling and accessory options refer here

Our anytime reverse and auxiliary camera system allows you to view your selected camera at any time with a simple push of the included factory styled switch on the factory head unit.

Our harnesses will plug directly into the back of your factory head unit with NO cutting or modification to the existing factory wires required!

Once the patch harnesses are connected, simply connect the harness to the included factory style switch.

Also suits the new Mazda BT-50 models.

Additional information

Weight 0.25 kg
Make Model Year
Isuzu D-Max 2011 - 2022
Isuzu D-Max LS-M 2021 - 2022
Isuzu D-Max LS-U 2021 - 2022
Isuzu D-Max MU-X 2012 - 2022
Isuzu D-Max SX 2021 - 2022
Isuzu D-Max X-Terrain 2021 - 2022
Isuzu MU-X 2013 - 2022
Isuzu MU-X LS-M 2021 - 2022
Isuzu MU-X LS-T 2021 - 2022
Isuzu MU-X LS-U 2021 - 2022
Mazda BT50 2021 - 2022
Mazda BT50 GT 2021 - 2022
Mazda BT50 XTR 2021 - 2022


There are no reviews yet.

Be the first to review “Camera Integration System Suits Isuzu D-MAX & MU-X”

Your email address will not be published.