Search results: “ford ranger”
Showing 1–9 of 12 results
-
Auto AccessoriesOne touch Window Module Suits Ford Ranger Passengers Window Switches
Once installed to any of the passenger’s window switches, to operate simply tap the existing switch once and the window will fully open or close without the need to keep holding the window switch in position.
Manual operation is still maintained, hold the switch to operate the window and release at any time for the window to stop.
Once fitted to the passenger’s window switch the corresponding window switch on the drivers master window switch becomes full auto for that particular window, enabling the driver to have full auto function at their fingertips in addition to the passenger.
Partially remove the door panel to gain access to the underside of the window switch then it’s a simple plug and play installation, just unplug the existing window switch connector and fit the Y patch harness between the factory connector and window switch.
(1 review)AUD$46.00 Add to cart -
Auto AccessoriesAuto Window Module Suits Ford Ranger PX2 PX3 PU
Always forgetting to close all the windows after you have removed the keys from the ignition or eliminate the possibility that your passenger’s have left the rear windows down without your knowledge leaving your vehicles contents vulnerable.
Transforms all the existing window switches on the drivers side to one touch open / close
This module allows for all windows to be automatically closed every time the vehicle is locked using the key remote or touch censor on the door handle (if equipped), while still allowing for remote operation using your original key remote to open or close the windows.
This model is for right-hand drive vehicles only.
(0 reviews)AUD$135.00 Add to cart -
Auto AccessoriesAuto Window Module Suits Ford Ranger PX1
Always forgetting to close all the windows after you have removed the keys from the ignition or eliminate the possibility that your passenger’s have left the rear windows down without your knowledge leaving your vehicles contents vulnerable.
This module allows for all windows to be automatically closed every time the vehicle is locked using the key remote, while still allowing for remote operation using your original key remote to open or close the windows.
Transforms all the existing window switches on the drivers side to one touch open / close.
100% direct plug & play no splicing into the vehicles central locking wires required.
(0 reviews)AUD$135.00 Add to cart -
Auto AccessoriesCentral Locking Tailgate System Suits Ford Ranger PX1 PX2 PX3 PU
Central locking Tailgate system suits Ford Ranger PX1, PX2, PX3 & PU models, all must have a lockable (key entry) tailgate latch and existing central locking on the fuel release cover.
Note: Not suitable for the Next Gen Ford Ranger
No splicing into the vehicles electrical system is required this is a 100% true plug & play harness connecting to the existing factory central locking connector that is located behind the fuel release cover.
Uses existing vehicles remote or via the door handle sensor (if equipped).
Laser cut 304 Stainless steel actuator bracket included, so no additional drilling into the vehicles metal tailgate required uses existing mounting fixtures.
Pre-bent actuator rod is also supplied so no additional fabrication required.(20 reviews)AUD$110.00 Add to cart -
Auto Accessories
Auto Window & Mirror Module Suits Ford Ranger PX2 PX3 PU
Two great functions incorporated in the same module that is fully 100% direct plug & play no splicing into the vehicles central locking wires required.
Once the vehicle is locked using the key remote the side mirrors fold in and fold back once the vehicle is unlocked using the key remote.
Always forgetting to close all the windows after you have removed the keys from the ignition or eliminate the possibility that your passenger’s have left the rear windows down without your knowledge leaving your vehicles contents vulnerable.
This module allows for all windows to be automatically closed every time the vehicle is locked using the key remote, while still allowing for remote operation using your original key remote to open or close the windows.
Transforms all the existing window switches on the drivers side to one touch open / close.
This module is for right-hand drive vehicles only.
Suitable For:
Right-hand drive Ford Ranger models that have the factory fitted electric folding mirrors.
(4 reviews)AUD$165.00 Add to cart -
Auto AccessoriesAuto Folding Mirror Module suits Ford Ranger & Everest
Auto Folding P51A Mirror Module suitable for the Ford Ranger & EverestThis module is also fully compatible with the Ford Ranger PX1 to PX3, PU, Everest & Raptor models along with the European and North American Ranger that have the mirror fold button above the mirror adjustment switch.Module function: Lock doors using the key remote or touch censor on the door handle (if equipped). both mirrors fold in, unlock doors using key remote both mirrors fold back out or turn ignition on mirrors fold out (this is user defined on installation).Having the ability to fold the vehicles mirrors when locked will greatly reduce the risk of them be damaged by passing cars, cyclist and pedestrians.The existing mirror fold button retains full function and can override the operation of the P51A module.(2 reviews)AUD$99.00 Add to cart -
Auto Accessories
Auto Folding Mirror Module suits Ford Ranger PX1
Auto Folding P51B Mirror Module suitable for the Ford Ranger PX1Module function: Lock doors using the key remote both mirrors fold in, unlock doors using key remote both mirrors fold back out or turn ignition on mirrors fold out (this is user defined on installation).Having the ability to fold the vehicles mirrors when locked will greatly reduce the risk of them be damaged by passing cars,cyclist and pedestrians.The existing mirror fold button retains full function and can override the operation of the P51B module.(0 reviews)AUD$99.00 Add to cart -
Auto Accessories
Auto Window & Mirror Module Suits Ford Ranger PX1
Two great functions incorporated in the same module that is fully 100% direct plug & play no splicing into the vehicles central locking wires required.
Can also be fitted to models that do not have the factory auto folding mirrors for the auto window function.
Once the vehicle is locked using the key remote the side mirrors fold in and fold back once the vehicle is unlocked using the key remote (models with factory fitted electric folding mirrors).
Always forgetting to close all the windows after you have removed the keys from the ignition or eliminate the possibility that your passenger’s have left the rear windows down without your knowledge leaving your vehicles contents vulnerable.
This module allows for all windows to be automatically closed every time the vehicle is locked using the key remote, while still allowing for remote operation using your original key remote to open or close the windows.
Transforms all the existing window switches on the drivers side to one touch open / close.
(0 reviews)AUD$165.00 Add to cart -
Auto Accessories
Auto Folding Mirror Module & Central Locking Tailgate Bundle System suits Ford Ranger
Auto Folding P51A Mirror Module & Central locking tailgate system suitable for the Ford RangerThis system is fully compatible with the Ford Ranger MK2, MK3 & PU from 2015 – 2022 that have the mirror fold button above the mirror adjustment switch.Note: Not suitable for the Next Gen Ford RangerMirror Module function: Lock doors using the key remote or touch censor on the door handle (if equipped). both mirrors fold in, unlock doors using key remote both mirrors fold back out or turn ignition on mirrors fold out (this is user defined on installation).Having the ability to fold the vehicles mirrors when locked will greatly reduce the risk of them be damaged by passing cars, cyclist and pedestrians.The existing mirror fold button retains full function and can override the operation of the P51A module.Central locking Tailgate system suits:
No splicing into the vehicles electrical system is required this is a 100% true plug & play harness connecting to the existing factory central locking connector that is located behind the fuel release cover.
Uses existing vehicles remote or via the door handle sensor (if equipped).
Laser cut 304 Stainless steel actuator bracket included, so no additional drilling into the vehicles metal tailgate required uses existing mounting fixtures.
Pre-bent actuator rod is also supplied so no additional fabrication required.Features:
- No soldering or splicing into the existing wiring required, true plug & play
- Direct connections to the factory wiring and actuator
- Approximately 3 meters in length
- Cable is fully protected by convoluted tubing
- Manufactured here in Australia
- Cable ties included
- Torx T30 bit included
- 3mm Hex shaft drill bit included
- High quality actuator with Japanese Mabuchi motor with controlled push/pull force of > 4.0kgs for long term reliability
- Housing is made from Nylon & POM is fully sealed with reinforced steel rivets
- The actuator head has a full 360° rotation and is fully removable making installation of the included metal rod simple
- Laser cut 304 Stainless steel actuator bracket, so no additional drilling into the vehicles metal tailgate required as uses existing mounting fixtures
- Pre-bent actuator rod so no additional fabrication required
- Comprehensive DIY installation instructions provided (via downloadable link just scan the QR code included with the packaging).
(0 reviews)AUD$190.00 Add to cart
