Central Locking Tailgate System Suits Ford Ranger PX1 PX2 PX3 PU

Code: T1HKIT
(20 customer reviews)

Central locking Tailgate system suits Ford Ranger PX1, PX2, PX3 & PU models, all must have a lockable (key entry) tailgate latch and existing central locking on the fuel release cover.


Note: Not suitable for the Next Gen Ford Ranger


No splicing into the vehicles electrical system is required this is a 100% true plug & play harness connecting to the existing factory central locking connector that is located behind the fuel release cover.

Uses existing vehicles remote or via the door handle sensor (if equipped).

Laser cut 304 Stainless steel actuator bracket included, so no additional drilling into the vehicles metal tailgate required uses existing mounting fixtures.
Pre-bent actuator rod is also supplied so no additional fabrication required. 


In stock

In stock



  • No soldering or splicing into the existing wiring required, true plug & play
  • Direct connections to the factory wiring and actuator
  • Approximately 3 meters in length
  • Cable is fully protected by convoluted tubing
  • Manufactured here in Australia
  • Cable ties included
  • Torx T30 bit included
  • 3mm Hex shaft drill bit included 
  • High quality actuator with Japanese Mabuchi motor with controlled push/pull force of > 4.0kgs for long term reliability 
  • Housing is made from Nylon & POM is fully sealed with reinforced steel rivets 
  • The head has a full 360° rotation and is fully removable making installation of the included metal rod simple 
  • Laser cut 304 Stainless steel actuator bracket, so no additional drilling into the vehicles metal tailgate required as uses existing mounting fixtures
  • Pre-bent actuator rod so no additional fabrication required
Comprehensive DIY installation instructions provided (via downloadable link just scan the QR code included with the packaging).

Additional information

Weight 0.480 kg
Dimensions 22 × 20 × 6 cm
Make Model Year
Ford Ranger MK1 2011 - 2014
Ford Ranger MK2 2015 - 2018
Ford Ranger MK3 2019 - 2021

20 reviews for Central Locking Tailgate System Suits Ford Ranger PX1 PX2 PX3 PU

  1. Scott Taprell

    Best mod I have done so far. Easy install, perfect instructions couldn’t rate high enough.

  2. Glenn Bateman

    Great kit with everything you need including thorough instructions. Easy DIY even for a novice. Highly recommended mod.

  3. Stuart (verified owner)

    Just fitted my central locking to my Ranger, works perfectly. Instructions were relatively easy to follow. Great job guys, it was just what I wanted.

  4. Michael (verified owner)

    nice, easy and simple. your mum could install it!

  5. Michael

    So easy and worth the money, great product 🙂

  6. Robin Delport

    Nice and Easy Kit with everything you need.. Fantastic piece of gear!

  7. Trent Gardner (verified owner)

    Works perfectly, easy install. This really should be factory!

  8. David (verified owner)

    I was reluctant to buy this kit at first being only a fraction of the cost of other kits in the market but glad I did. The kit is very good quality and easy to install with good easy to follow instructions. Works fine and they even supply a drill and torx bits.

  9. Nathan (verified owner)

    Price is amazing.
    Works an absolute treat!
    Much better then using a key.

  10. Michael

    Extremely happy
    Highly recommend
    I installed a tailgate remote lock for my new ranger
    Now the tailgate locks and unlocks with the door locks
    Sceptical at first due to the price being much much lower compared to other kits
    Ford quoted $400!!!!
    Thank you for a great product
    Everything included in the kit with simple instructions

  11. Eric (verified owner)

    Awesome little kit and super easy to install.
    Peace of mind now knowing all the tools i carry on a daily are secured now

  12. Van Dung Pham

    Easy to follow instructions with everything you need included. i got stuck when locating the plug in the ranger, and they rang and help locate it. Big thanks.

  13. Amtesh (verified owner)

    It took me couple of hours to install it myself, Scanned barcode on backside of the packet and took me to Instructions page. Instructions were on point. Good quality kit and good customer service as they helped me through email by replying to mine real quick. Ford quoted me 400-500.

  14. John

    Easy to install with drill and torx supplied, instructions were straightforward. Was sceptical at first because of the price, really happy with prompt delivery, shipping details within an hour of ordering . I live remote and normally have long. Never do reviews but was so pleased with product, price and service felt I had to.

  15. Andrew Johnston

    The easiest and best kit I’ve ever bought for a car! It fitted exactly as promised and worked exactly as promised. The instructions were clear and concise and easy to follow.
    All the bits needed were inside the kit, and then some.
    Top marks guys!

  16. Jusitn Street (verified owner)

    This was one of the most satisfying things to install thanks to how well the kit produced. From the fact that all the bits you need to install the product are supplied to the instructions provided, which are perfect, this was a breeze to install. The hardest part was taking the inner guard out but once that is complete the install takes about 45 mins.

    This is a must purchase if you have a ranger. I can not recommend it enough.

  17. Austin (verified owner)

    Was skeptical at first when I first made contact. Kerry replied that it is easy to install. Bit the bullet and bought it. Glad I did. One of the best installation manual I can think off. Very straight forward. I stalled this over a bottle of beer :).

  18. Julian (verified owner)

    Honestly such a good kit. Super easy to install and includes everything needed. Works well and looks rigid.

  19. Keith (verified owner)

    Wonderful kit. Clear instructions and easy to fit to Ranger PX3. Works well.

  20. Steve Tully

    Wow, so easy to fit. All parts include including tools. Great item for any Ford Ranger owner.
    Have purchased from Trac before and always exceeds expectations in both quality, fitment and technical infor from them. Well done guys

Add a review

Your email address will not be published. Required fields are marked *