Auto up/down Window Module Suits Nissan Skyline R34 Series One Passengers Window Switch

Code: WM34S1

Suits series one Nissan Skyline R34 sedan and coupe passengers window switch.

Once installed to any of the passenger’s window switches, to operate simply tap down the existing switch once and the window will fully open flick up to auto close without the need to keep holding the window switch in position.

Manual operation is still maintained, hold the switch to operate the window and release at any time for the window to stop.

 

 

AUD$43.64

In stock

In stock

Description

Module Function: 

Transforms a single passengers window switch and the corresponding window switch on the drivers master window switch to full one touch auto operation (it is not suitable for direct fitment to the drivers master window switch).

The patch harness is fully 100% direct plug & play connecting to the passengers factory window switch connector, so no splicing or connecting to any individual wires is required.

System includes:

  • Module – Auto one touch window control module
  • Y patch harness with full 100% direct plug & play connectors (no splicing wires required)
  • Adhesive pad (hook & loop) to attach module to inside trim
  • Installation instructions via a QR code on the packaging.

Operating features: 

  • Hold window switch up or down for manual control from the passengers or drivers master window switch

    Window switch functions normally – window stops when the switch is released.

  • Tap the window switch once to initiate full auto window operation from the passengers or drivers master window switch

    Window will automatically close / open without the need to keep holding the window switch.

  • Compatible with our auto window and auto window and mirror modules

    All window functions are maintained when remotely opening or closing the windows from partially open to fully opening or closing.

Suits the following vehicles:

Nissan Skyline R34 Series one sedan and coupe (May 1998 – August 2000).

NOTE: For this system to operate correctly the wiring must be factory, if the mirror wiring has been modified so it has a constant 12v (instead of 12v once ignition is on) the auto function will not operate correctly.

If you can operate the mirror fold switch when the ignition is off then the wiring has been modified and will need to be put back to factory specifications (12v only once ignition is on).

 

Additional information

Weight 0.075 kg
Dimensions 10 × 8 × 3 cm
Make Model Year
Nissan Skyline R34 1989 - 2000

Reviews

There are no reviews yet.

Be the first to review “Auto up/down Window Module Suits Nissan Skyline R34 Series One Passengers Window Switch”

Your email address will not be published. Required fields are marked *