Description
Module Function:
Transforms a single passengers window switch and the corresponding window switch on the drivers master window switch to full one touch auto operation (it is not suitable for direct fitment to the drivers master window switch).
The patch harness is fully 100% direct plug & play connecting to the passengers factory window switch connector, so no splicing or connecting to any individual wires is required.
IMPORTANT NOTE: Our system uses current sensing to operate the window regulator, it does not use anti pinch so if a object is in encountered between the window and door frame the window will stop. Once the obstruction has been removed the window switch can be reused to continue window movement.
The window lock switch on the master window switch can still be used to isolate the passengers windows from operating.
If your windows are not functioning properly (very slow at opening or closing) our system will not be suitable as it will detect over current due to the window regulator working harder than it should stopping the window movement.
System includes:
- Module – Auto one touch window control module
- Dedicated Y patch harness with full 100% direct plug & play connectors* (no splicing wires required)
- Adhesive pad (hook & loop) to attach module to inside trim.
Operating features:
- Hold window switch up or down for manual control from the passengers or drivers master window switch
Window switch functions normally – window stops when the switch is released.
- Tap the window switch once to initiate full auto window operation from the passengers or drivers master window switch.
Window will automatically close / open without the need to keep holding the window switch.
- Compatible with our auto window and auto window and mirror modules.
All window functions are maintained when remotely opening or closing the windows from partially open to fully opening or closing.
NOTE: Series one and series two use different connectors so ensure you select the correct system in the drop down option box.
- Series one uses a six pin connector (for all passengers window switches)
- Series two uses a eight pin connector (for all passengers window switches).
*The door panel is required to be removed to fit the system in place.














Reviews
There are no reviews yet.