Description
Module Function:
Transforms a single passengers window switch and the corresponding window switch on the drivers master window switch to full one touch auto operation.
One module operate one window so three modules would be required if wanting all passengers windows to be auto up/down
The patch harness is fully 100% direct plug & play connecting to the factory window switch connector, so no splicing or connecting to any individual wires is required.
Fast installation as the door panel is not required to be removed, just the trim around the window switch.
IMPORTANT NOTE: Our system uses current sensing to operate the window regulator, it does not use anti pinch so if a object is in encountered between the window and door frame the window will stop. Once the obstruction has been removed the window switch can be reused to continue window movement.
The window lock switch on the master window switch can still be used to isolate the passengers windows from operating.
If your windows are not functioning properly (very slow at opening or closing) our system will not be suitable as it will detect over current due to the window regulator working harder than it should stopping the window movement.
System includes:
- Auto one touch window control module (to transform one passenger’s window switch to one touch auto)
- Y patch harness with full 100% direct plug & play connectors (no splicing wires required)
- Adhesive pad (hook & loop) to attach module to inside trim.
Tools Required:
- Trim removal tool.
The door panel is not required to be removed simply pry up the window switch fascia with a trim tool then disconnect window switch connector and fit the included Y patch harness.
- Affix the supplied hook and loop adhesive tape to the back of the module
- Connect patch harness to the window connector and window switch
- Affix module to a smooth surface
- Refit window switch fascia.
Operating features:
- Hold window switch up or down for manual control from the passengers or drivers master window switch
Window switch functions normally – window stops when the switch is released.
- Tap the window switch once to initiate full auto window operation from the passengers or drivers master window switch
Window will automatically close / open without the need to keep holding the window switch.













Reviews
There are no reviews yet.