Description
Function:
Transforms a single passengers window switch to full one touch auto up/down operation and the corresponding switch on the drivers master window switch.
The patch harness is fully 100% direct plug & play connecting to the factory window switch connector, so no splicing or connecting to any individual wires is required.
System includes:
- Module – Auto up/down one touch window control module
- Patch harness with full 100% direct plug & play connectors (no splicing wires required)
- Adhesive pad (hook & loop) to attach module to inside trim.
IMPORTANT NOTE: Our system uses current sensing to operate the window regulator, it does not use anti pinch so if an object is encountered between the window and door frame the window will stop. Once the obstruction has been removed the window switch can be reused to continue window movement.
The window lock switch on the master window switch can still be used to isolate the passengers windows from operating.
Operating features:
- Hold window switch up or down for manual control
Window switch functions normally – window stops when the switch is released.
- Tap the window switch once to initiate full auto window operation
Window will automatically close / open without the need to keep holding the window switch.
- When window is opening or closing tap the switch again to pause window.
Installation:
The door trim is not required to be removed.
- Remove switch fascia using a trim removal tool
- Disconnect existing factory window switch connector
- Fit supplied plug and play Y patch harness to the corresponding connectors
- Afix module to a smooth surface, with provided hook & loop adhesive pad
- Refit switch fascia.























Reviews
There are no reviews yet.