Custom Made (pg2)

Code: PJZS80
Custom Made (pg2)

Custom Made products page

Please contact us if you require a auto mirror, window system that does not appear on our website, we may just be able to produce for you

 

 

 

AUD$246.00

Out of stock

Description

Toyota Supra (JZS80)

Auto windows

  • Auto windows (fits within driver’s door panel) gives you one touch up/down on both windows and auto close and remote open
  • One touch auto window for passengers’ side (JZS80)
  • One touch auto window for passengers’ side (Toyota Hilux N80)
You will need to run a wire from within the door panel to a constant 12v fused supply (this will then allow for the auto close of the windows via the central locking and remotely from the key fob), will supply a 2mtr length with system.

Module Function: 

Lock doors windows will be automatically closed if left open after the ignition has been turned off and the doors locked using the key remote. In addition, windows can be controlled remotely by the key remote to open and close or pause during operation.

The harness is fully 100% direct plug & play connecting to all applicable factory connectors, so no splicing or connecting to any individual wires is required. As the factory wiring does not have a constant 12v at the window switch an additional wire (included) will need to be routed to a constant (fused) 12v supply.

System includes:

  • Module – Auto windows
  • Wiring harness with full 100% direct plug & play connectors (no splicing into the vehicles central locking wires required)
  • Adhesive pad (hook & loop) to attach module to inside of door trim.

 

Operating features: 

  1. Auto window up:

    After ignition is off and doors closed, press lock on the key remote, the front will close, if left down after ignition is turned off.

  1. Using the key remote to lower all windows vehicle remains unlocked:

    When engine is off, press unlock-lock-unlock the two windows will lower at the same time. To lock doors after this function, press lock on the key remote, to lock and close all windows press lock again at any interval.

  1. Pausing window opening / closing:

    Press lock or unlock on the key remote during auto window operation, all windows will pause.

  1. When ignition is on botb windows become one touch auto up/down function from the driver’s window switch panel by depressing each individual switch for half a second.
  1. All windows will retract down slightly:

    After ignition is off, press lock-unlock-lock on the key remote, all windows will lower a very small amount for ventilation. By repeating lock-unlock-lock they will lower again slightly and stop, this process can be repeated.

  1. Lock vehicle without closing windows:

    After ignition is off and the door is closed, press unlock-unlock-lock, only locks the vehicle without lifting the windows.

Additional information

Weight 0.025 kg
Dimensions 5 × 5 × 5 cm
Make Model Year
Electrical Universal 1990 - 2026
Toyota Supra (JZS80) 1993 - 2002

Reviews

There are no reviews yet.

Be the first to review “Custom Made (pg2)”

Your email address will not be published. Required fields are marked *


Products that also suit

  • Auto Window & Mirror Switch Module Suits Nissan Navara D23 NP300
    Auto Accessories

    Auto Window & Mirror Switch Module Suits Nissan Navara D23 NP300

    Two great functions incorporated into this full replacement master window switch module.

    Always forgetting to close all the windows after you have removed the keys from the ignition or eliminate the possibility that your passenger’s have left the rear windows down without your knowledge leaving your vehicles contents vulnerable.

    NOTE: This model is only suitable for Australian and New Zealand NP300 models as other countries use a different connection for the door lock actuator so a plug and play patch harness is not available.

    (4 reviews)
    AUD$195.00 Add to cart
  • One touch auto up / down window module suits Mitsubishi Triton & Lancer
    Auto Accessories

    One touch auto up / down window module suits Mitsubishi Triton & Lancer

    Once installed to any of the passenger’s window switches, to operate simply tap the existing switch once and the window will fully open or close without the need to keep holding the window switch in position.

    Manual operation is still maintained, hold the switch to operate the window and release at any time for the window to stop.

    Once fitted to the passenger’s window switch the corresponding window switch on the drivers master window switch becomes full auto for that particular window, enabling the driver to have full auto function at their fingertips in addition to the passenger.

    Installation:

    Remove the window switch fascia by first removing the single Phillips screw then inserting a trim tool between the fascia and door panel and prying upwards, then it’s a simple plug and play installation, just unplug the existing window switch connector and fit the Y patch harness between the factory connector and window switch.

    (0 reviews)
    AUD$49.50 Add to cart
  • Idle Off Eliminator suits BT-50
    Auto Accessories

    Idle Off Eliminator suits BT-50

    Frustrated about your vehicles Idle off system turning off the vehicles engine at traffic lights, roundabouts, busy stop start traffic situations or when you least expected it.

    Our Idle off eliminator provides a very simple plug & play solution that will disable this factory setting automatically, every time you start the vehicle.

    Should you want to reactivate for any particular situation simply push the switch on and the ISS will be implemented until the vehicles ignition is turned off and back on, or you manually press the switch again to deactivate.

     

    (0 reviews)
    AUD$75.00 Add to cart
  • Auto up/down Window Module Suits RG Colorado Passengers Window Switch
    Auto Accessories

    Auto up/down Window Module Suits RG Colorado Passengers Window Switch

    Suits Holden RG Colorado (Pre-Facelift) 2012 – 2016 both single and dual cab models.

    Once installed to any of the passenger’s window switches, to operate simply tap the existing switch once and the window will fully open or close without the need to keep holding the window switch in position.

    Manual operation is still maintained, hold the switch to operate the window and release at any time for the window to stop.

    Once fitted to the passenger’s window switch the corresponding window switch on the drivers master window switch becomes full one touch auto for that particular window, enabling the driver to have full one touch auto function at their fingertips in addition to the passenger.

    Remove the trim around the factory switch then it’s a simple plug and play installation, just unplug the existing window switch connector and fit the Y patch harness between the factory connector and window switch in place.

    (0 reviews)
    AUD$49.50 Add to cart
  • Central Locking Tailgate System Suits Mazda BT-50
    Auto Accessories

    Central Locking Tailgate System Suits Mazda BT-50

    Tailgate central locking suits Mazda BT-50 models.

    Only fits Mazda BT-50 UR Models that have the key lock within the tailgate handle.

     

    NOTE: Not suitable for the new BT-50 based of the Isuzu platform (refer # T2HKIT)

     

    No splicing into the vehicles electrical system is required this is a 100% true plug & play harness connecting to the existing factory central locking connector that is located behind the fuel release cover.

    Laser cut 304 Stainless steel actuator bracket included, so no additional drilling into the vehicles metal tailgate required uses existing mounting fixtures.
    Pre-bent actuator rod is also supplied so no additional fabrication required. 

    (1 review)
    AUD$140.00 Add to cart
  • Camera Integration System Mitsubishi Triton
    Auto Accessories

    Camera Integration System Mitsubishi Triton

    The integration system will allow for an Aux or factory camera to be displayed on the factory head unit in any gear for all models, without the 360 camera option.

    Models with the 360 camera option will only show the Aux or factory camera when in reverse when fitting the integration system.

    Suits:

    : Triton 2016-2018 MQ
    : Triton 2019-2023 MR (not suitable with the 360 Camera option)

     

    In addition to the factory reverse camera a second auxiliary video input is available so either of the cameras can be displayed on the factory head unit in any gear, (excluding models with 360 camera option) giving you the ability to monitor the tow hitch from the factory reverse camera or a auxiliary camera located on the back of your caravan or even the front of your vehicle, with a simple press of the switch.

     

    (0 reviews)
    AUD$175.00 – AUD$195.00 Select options This product has multiple variants. The options may be chosen on the product page
-