Description
Three-camera system (x2 M12 connections and factory camera input) this is a made to order system.
System includes :
A three-camera integration harness (includes switches)
x2 M12 10mtr 4 Pin extension cables
x1 Dome camera
x1 Trim tool 5pcs set.
• The system will have two M12 4 pin patch leads (200mm in length) at the back of the factory head unit both would supply 12v to each individual camera with common negative and received video signals
• You will need two blank switch locations on the right-hand side of the steering wheel, one for a dual switch and one for a single changeover switch
• Any one of the three cameras (factory reverse and 2 AUX) can be viewed on the factory screen in any gear when ignition is on.
The head unit will need to be removed to install our integration system (this system is then fully plug and play no intrusive connections are required).
When the top switch of the dual switch is selected this turns on the factory reverse camera, in addition to the top switch being on the bottom switch turns on the AUX camera input (input one).
To change to input two, turn on/off the changeover switch.
Not included:
• Quick connect 4 pin coil cord connection.
• Brackets for quick connect sockets.
Reviews
There are no reviews yet.