This eight pin patch harness is fitted inside the engine bay between the factory headlight and headlight connector providing a 12 volt output whenever the vehicles high beam headlights are activated.
No cutting of the factory wiring is required, simply unplug the existing factory connector and fit the patch harness between the factory connectors and then connect the output T connector directly to your existing wiring harness.
| Weight | 0.050 kg |
|---|---|
| Dimensions | 15 × 5 × 3 cm |
| Make | Model | Year |
|---|---|---|
| Isuzu | D-Max | 2024 |
With a large 1/3 inch colour SONY® CCD sensor providing sharper and higher detail in all light conditions, than standard 1/4 inch colour CMOS sensor cameras.
Easy installation as only one small four pin moulded connector (7mm diameter) four meters in length is required to pass through the firewall.
All exposed connections are all within the vehicle (video, power, mirror image and guidelines options) not in the extreme environment of the engine bay or under the rear of the vehicle.
Changing image from forward or reverse facing or adding guidelines is just a matter of cutting small, looped wires that are also located within the vehicle.
Input voltage is fully regulated to ensure a stable video signal across different input voltages and is again located within the vehicle.
This patch harness gets fitted inside the vehicle just above the drivers side kick panel and provides a 12 volt output whenever the vehicles high beam headlights are activated.
No cutting of the factory wiring is required, simply unplug the existing factory connector and fit the patch harness between the factory connectors and then connect the output connector to your existing wiring harness.
This patch harness is also compatible with the D-Max and BT-50 models that have factory LED headlights, including the new facelift MY24 D-Max.
This camera is ideally suited for vertically mounting on the back of a caravan.
With a large 1/3 inch colour SONY® CCD sensor providing sharper and higher detail in all light conditions, than standard smaller 1/4 inch colour CMOS sensor cameras.
This camera is ideally suited for undertray mounting (pendulum mounted) and has fixed guide lines incorporated .
With a large 1/3 inch colour SONY® CCD sensor providing sharper and higher detail in all light conditions, than standard 1/4 inch colour CMOS sensor cameras.
Input voltage is fully regulated (6 – 24v) to ensure a stable video signal across different input voltages.
Reviews
There are no reviews yet.