Description
Specification :
16 pin single male to 16 pin dual female OBD, OBD2 connectors
Overall approximate length is 300 mm
Y Type Flat OBD, OBD2 Y Cable
Net weight 90 grams
Flat OBD OBD2 Y Cable
Additional information
| Weight | 0.090 kg |
|---|---|
| Dimensions | 10 × 5 × 4 cm |
| Make | Model | Year |
|---|---|---|
| Electrical | Universal | 1990 - 2023 |
Products that also suit
-
Auto AccessoriesAuto Window, Mirror & Passengers window Modules Suits All New Isuzu MU-X
Two great functions incorporated in the same module that is fully 100% direct plug & play no splicing into the vehicles central locking wires required.
An additional module is also included that is fitted to a passengers window switch (normally the front passengers window switch) allowing the passenger to operate their switch in full auto or manual mode.
Once the vehicle is locked using the key remote or sensor on the door handle the side mirrors fold in and fold back once the vehicle is unlocked using the key remote or sensor on the door handle (models with factory fitted electric folding mirrors).
Models with proximity locking, the mirrors will also fold in and any open windows will close when the vehicle automatically locks.
Always forgetting to close all the windows after you have removed the keys from the ignition or eliminate the possibility that your passenger’s have left the rear windows down without your knowledge leaving your vehicles contents vulnerable.
This module allows for all windows to be automatically closed every time the vehicle is locked using the key remote, while still allowing for remote operation using your original key remote to open or close the windows.
Transforms all the existing window switches on the drivers side to one touch open / close
An additional module is included that is fitted to a passengers window switch (normally the front passengers window switch) allowing the passenger to operate their switch in full auto or manual mode.
Suits both LS-U and LS-T models fitted with electric folding mirrors
(0 reviews) -
Auto AccessoriesAuto Folding Mirror Module Suits Nissan Navara D23
Auto Folding P91 Mirror Module suitable for the:- Nissan Navara D23 Series 2014 – 2022
Module function: Mirrors will fold automatically in when the vehicle is locked using the remote key fob or button on the door handle allowing for full use of the mirrors to safely exit the vehicle on busy roads. unlock doors both mirrors will fold back out.Having the ability to fold the vehicles mirrors when locked will greatly reduce the risk of them be damaged by passing cars, cyclist and pedestrians and is a great visual indication that the vehicle has been locked.Retain full use of the mirrors to safely exiting the vehicle.The existing mirror fold button retains full function and overrides the operation of the P91 module when the vehicles ignition is on.(0 reviews) -
Auto Accessories
Auto Folding Mirror Module suits Toyota HiAce 2019 Onwards
Auto Folding P21 Mirror Module suitable for the Toyota HiAce van 2019 – onwardsModule function: Mirrors will fold automatically in when the vehicle is locked using the remote key fob, allowing full use of the mirrors to safely exit the vehicle on busy roads.Unlock doors using key remote both mirrors fold back out.The module can be configured during the installation to unfold the mirrors when the vehicles is unlocked (default) or when the ignition is on (user selectable).Having the ability to fold the vehicles mirrors when locked will greatly reduce the risk of them be damaged by passing cars, cyclist and pedestrians.The existing mirror fold button retains full function and can override the operation of the P21 module.(0 reviews) -
Auto AccessoriesAuto up/down Window Module Suits RG Colorado Passengers Window Switch
Suits Holden RG Colorado (Pre-Facelift) 2012 – 2016 both single and dual cab models.
Once installed to any of the passenger’s window switches, to operate simply tap the existing switch once and the window will fully open or close without the need to keep holding the window switch in position.
Manual operation is still maintained, hold the switch to operate the window and release at any time for the window to stop.
Once fitted to the passenger’s window switch the corresponding window switch on the drivers master window switch becomes full one touch auto for that particular window, enabling the driver to have full one touch auto function at their fingertips in addition to the passenger.
Remove the trim around the factory switch then it’s a simple plug and play installation, just unplug the existing window switch connector and fit the Y patch harness between the factory connector and window switch in place.
(0 reviews) -
Auto Accessories
Auto Window & Mirror Module Suits Mazda BT50 (pre MY21)
Suitable for the 2nd Generation Mazda BT-50 (based off the Ford Ranger platform) 2011 – 2020
Two great functions incorporated in the same module that is fully 100% direct plug & play no splicing into the vehicles central locking wires required.
Can also be fitted to models that do not have the factory auto folding mirrors for the auto window function.
Once the vehicle is locked using the key remote the side mirrors fold in and fold back once the vehicle is unlocked using the key remote (models with factory fitted electric folding mirrors).
Always forgetting to close all the windows after you have removed the keys from the ignition or eliminate the possibility that your passenger’s have left the rear windows down without your knowledge leaving your vehicles contents vulnerable.
This module allows for all windows to be automatically closed every time the vehicle is locked using the key remote, while still allowing for remote operation using your original key remote to open or close the windows.
Transforms all the existing window switches on the drivers side to one touch open / close.
(0 reviews) -
Auto Accessories
Auto Folding Mirror Module suits Mazda CX5 (KE)
Auto Folding P11 Mirror Module suitable for the Mazda CX-5- First generation (KE) 2012 – 2017
Module function: Mirrors will fold automatically in when the vehicle is locked using the remote key fob or touch panel on the door handle, allowing full use of the mirrors to safely exit the vehicle on busy roads.Unlock doors using key remote or touch panel on the door handle both mirrors will fold back out.The module can be configured during the installation to unfold the mirrors when the vehicles is unlocked (default) or when the ignition is turned on (user selectable upon installation).Having the ability to fold the vehicles mirrors when locked will greatly reduce the risk of them be damaged by passing cars, cyclist and pedestrians and is a great visual indictor that the vehicle has been lockedThe existing mirror fold button retains full function and overrides the operation of the P11 module when the vehicles ignition is on.(0 reviews)
Reviews
There are no reviews yet.