Flat OBD OBD2 Y Cable

Code: OBDC

Enables two separate OBD, OBD2 devices to be connected to a single OBD, OBD2 port

 

AUD$13.20

Out of stock

Description

Specification : 

16 pin single male to 16 pin dual female OBD, OBD2 connectors

Overall approximate length is 300 mm

Y Type Flat OBD, OBD2 Y Cable

Net weight 90 grams

Additional information

Weight 0.090 kg
Dimensions 10 × 5 × 4 cm
Make Model Year
Electrical Universal 1990 - 2023

Reviews

There are no reviews yet.

Be the first to review “Flat OBD OBD2 Y Cable”

Your email address will not be published. Required fields are marked *

Products that also suit

    Auto Accessories

    Auto Folding Mirror Module suits Subaru BRZ (ZD8)
    Auto Folding Mirror Module suitable for the second generation Subaru BRZ (ZD8) models
     
    Module function: Mirrors will fold automatically in when the vehicle is locked using the remote key fob or touch panel on the door handle, allowing full use of the mirrors to safely exit the vehicle on busy roads.
    Unlock doors using key remote or touch panel on the door handle both mirrors will fold back out.
    The module can be configured during the installation to unfold the mirrors when the vehicle is unlocked (default) or when the ignition is turned on (user selectable upon installation).
    Having the ability to fold the vehicles mirrors when locked will greatly reduce the risk of them be damaged by passing cars, cyclist and pedestrians.
     
    The existing mirror fold button retains full function and overrides the operation of the auto fold module. 
    (0 reviews)
    AUD$99.00 Add to cart
    Auto Accessories

    Auto Window & Mirror Module Suits Ford Ranger PX2 PX3 PU

    Two great functions incorporated in the same module that is fully 100% direct plug & play no splicing into the vehicles central locking wires required.

    Once the vehicle is locked using the key remote the side mirrors fold in and fold back once the vehicle is unlocked using the key remote.

    Always forgetting to close all the windows after you have removed the keys from the ignition or eliminate the possibility that your passenger’s have left the rear windows down without your knowledge leaving your vehicles contents vulnerable.

    This module allows for all windows to be automatically closed every time the vehicle is locked using the key remote, while still allowing for remote operation using your original key remote to open or close the windows.

    Transforms all the existing window switches on the drivers side to one touch open / close.

    This module is for right-hand drive vehicles only.

    Suitable For:

    Right-hand drive Ford Ranger models that have the factory fitted electric folding mirrors.

    (4 reviews)
    AUD$165.00 Add to cart
    Auto Accessories

    Auto Folding Mirror Module & Central Locking Tailgate Bundle System suits Ford Ranger
    Auto Folding P51A Mirror Module & Central locking tailgate system suitable for the Ford Ranger 
     
    This system is fully compatible with the Ford Ranger MK2, MK3 & PU from 2015 – 2022 that have the mirror fold button above the mirror adjustment switch. 
    Note: Not suitable for the Next Gen Ford Ranger
     
    Mirror Module function: Lock doors using the key remote or touch censor on the door handle (if equipped). both mirrors fold in, unlock doors using key remote both mirrors fold back out or turn ignition on mirrors fold out (this is user defined on installation).
    Having the ability to fold the vehicles mirrors when locked will greatly reduce the risk of them be damaged by passing cars, cyclist and pedestrians.
     
    The existing mirror fold button retains full function and can override the operation of the P51A module. 

    Central locking Tailgate system suits:

    No splicing into the vehicles electrical system is required this is a 100% true plug & play harness connecting to the existing factory central locking connector that is located behind the fuel release cover.

    Uses existing vehicles remote or via the door handle sensor (if equipped).

    Laser cut 304 Stainless steel actuator bracket included, so no additional drilling into the vehicles metal tailgate required uses existing mounting fixtures.
    Pre-bent actuator rod is also supplied so no additional fabrication required.

    Features:

    • No soldering or splicing into the existing wiring required, true plug & play
    • Direct connections to the factory wiring and actuator
    • Approximately 3 meters in length
    • Cable is fully protected by convoluted tubing
    • Manufactured here in Australia
    • Cable ties included
    • Torx T30 bit included
    • 3mm Hex shaft drill bit included
    • High quality actuator with Japanese Mabuchi motor with controlled push/pull force of > 4.0kgs for long term reliability
    • Housing is made from Nylon & POM is fully sealed with reinforced steel rivets
    • The actuator head has a full 360° rotation and is fully removable making installation of the included metal rod simple
    • Laser cut 304 Stainless steel actuator bracket, so no additional drilling into the vehicles metal tailgate required as uses existing mounting fixtures
    • Pre-bent actuator rod so no additional fabrication required
    • Comprehensive DIY installation instructions provided (via downloadable link just scan the QR code included with the packaging).
    (0 reviews)
    AUD$200.00 Add to cart
    Auto Accessories

    Central Locking Tailgate System Suits Ford Ranger PX1 PX2 PX3 PU

    Central locking Tailgate system suits Ford Ranger PX1, PX2, PX3 & PU models, all must have a lockable (key entry) tailgate latch and existing central locking on the fuel release cover.

     

    Note: Not suitable for the Next Gen Ford Ranger

     

    No splicing into the vehicles electrical system is required this is a 100% true plug & play harness connecting to the existing factory central locking connector that is located behind the fuel release cover.

    Uses existing vehicles remote or via the door handle sensor (if equipped).

    Laser cut 304 Stainless steel actuator bracket included, so no additional drilling into the vehicles metal tailgate required uses existing mounting fixtures.
    Pre-bent actuator rod is also supplied so no additional fabrication required. 

    (20 reviews)
    AUD$130.00 Add to cart
  • Auto Accessories

    Auto Folding Mirror Module Suits Nissan Navara D23 ST-X King Cab models
    Module function: Mirrors will fold automatically in when the vehicle is locked using the remote key fob or button on the door handle allowing for full use of the mirrors to safely exit the vehicle on busy roads. unlock doors both mirrors will fold back out.
    Having the ability to fold the vehicles mirrors when locked will greatly reduce the risk of them be damaged by passing cars, cyclist and pedestrians and is a great visual indication that the vehicle has been locked.
    Retain full use of the mirrors to safely exiting the vehicle.
     
    The existing mirror fold button retains full function and overrides the operation of the module when the vehicles ignition is on.

    Suitable For:

    Nissan Navara D23 ST-X King Cab models from 2015 onwards that have the factory fitted electric folding mirrors.

    (0 reviews)
    AUD$110.00 Add to cart
    Auto Accessories

    Auto Window & Mirror Switch Module Suits Nissan X-Trail T32

    Two great functions incorporated into this full replacement master window switch assembly.

    Always forgetting to close all the windows after you have removed the keys from the ignition or eliminate the possibility that your passenger’s have left the rear windows down without your knowledge leaving your vehicles contents vulnerable.

     

    (3 reviews)
    AUD$185.00 Add to cart
-