Description
Specification :
16 pin single male to 16 pin dual female OBD, OBD2 connectors
Overall approximate length is 300 mm
Y Type Flat OBD, OBD2 Y Cable
Net weight 90 grams
Enables two separate OBD, OBD2 devices to be connected to a single OBD, OBD2 port
AUD$13.20
Out of stock
Specification :
16 pin single male to 16 pin dual female OBD, OBD2 connectors
Overall approximate length is 300 mm
Y Type Flat OBD, OBD2 Y Cable
Net weight 90 grams
Weight | 0.090 kg |
---|---|
Dimensions | 10 × 5 × 4 cm |
Make | Model | Year |
---|---|---|
Electrical | Universal | 1990 - 2023 |
Always forgetting to close all the windows after you have removed the keys from the ignition or eliminate the possibility that your passenger’s have left the rear windows down without your knowledge leaving your vehicles contents vulnerable.
This module allows for all windows to be automatically closed every time the vehicle is locked using the key remote, button on the door handle (on applicable models) while still allowing for remote operation using your original key remote to open or close the windows.
Transforms all the existing window switches on the drivers side to one touch open / close.
System automatically locks doors when the vehicle exceeds approximately 15km/h for manual transmission models or when drive (D) is selected for automatic transmission models preventing access from the outside.
Doors will remain locked once the ignition is turned off for manual transmission models, for automatic transmission models doors will unlock when park (P) is selected, this can be user changed to stay locked during installation (applicable to automatic transmission models only).
Connects to the vehicles Central Gateway Control Module via a plug and play patch harness connecting within the steering column.
Once installed to any of the passenger’s window switches, to operate simply tap the existing switch once and the window will fully open or close without the need to keep holding the window switch in position.
Manual operation is still maintained, hold the switch to operate the window and release at any time for the window to stop.
Once fitted to the passenger’s window switch the corresponding window switch on the drivers master window switch becomes full auto for that particular window, enabling the driver to have full auto function at their fingertips in addition to the passenger.
Installation:
Remove the switch fascia for the X-Trail (T32) , for the NP300 (D23) partially remove the door panel to gain access to the underside of the window switch then it’s a simple plug and play installation, just unplug the existing window switch connector and fit the Y patch harness between the factory connector and window switch.
Reviews
There are no reviews yet.