Description
Specification :
16 pin single male to 16 pin dual female OBD, OBD2 connectors
Overall approximate length is 300 mm
Y Type Flat OBD, OBD2 Y Cable
Net weight 90 grams
Enables two separate OBD, OBD2 devices to be connected to a single OBD, OBD2 port
AUD$13.20
Out of stock
Specification :
16 pin single male to 16 pin dual female OBD, OBD2 connectors
Overall approximate length is 300 mm
Y Type Flat OBD, OBD2 Y Cable
Net weight 90 grams
Weight | 0.090 kg |
---|---|
Dimensions | 10 × 5 × 4 cm |
Make | Model | Year |
---|---|---|
Electrical | Universal | 1990 - 2023 |
Central locking Tailgate system suits Ford Ranger PX1, PX2, PX3 & PU models, all must have a lockable (key entry) tailgate latch and existing central locking on the fuel release cover.
Note: Not suitable for the Next Gen Ford Ranger
No splicing into the vehicles electrical system is required this is a 100% true plug & play harness connecting to the existing factory central locking connector that is located behind the fuel release cover.
Uses existing vehicles remote or via the door handle sensor (if equipped).
Laser cut 304 Stainless steel actuator bracket included, so no additional drilling into the vehicles metal tailgate required uses existing mounting fixtures.
Pre-bent actuator rod is also supplied so no additional fabrication required.
The integration system will allow for an Aux or factory camera to be displayed on the factory head unit in any gear for all models, without the 360 camera option.
Models with the 360 camera option will only show the Aux or factory camera when in reverse when fitting the integration system.
Suits:
: Challenger 2013-2015 PC
: Triton 2016-2018 MQ
: Pajero Sport 2015-2019 QE
: Triton 2019-2023 MR (not suitable with the 360 Camera option)
In addition to the factory reverse camera a second auxiliary video input is available so either of the cameras can be displayed on the factory head unit in any gear, (excluding models with 360 camera option) giving you the ability to monitor the tow hitch from the factory reverse camera or a auxiliary camera located on the back of your caravan or even the front of your vehicle, with a simple press of the switch.
Once installed to any of the passenger’s window switches, to operate simply tap the existing switch once and the window will fully open or close without the need to keep holding the window switch in position.
Manual operation is still maintained, hold the switch to operate the window and release at any time for the window to stop.
Once fitted to the passenger’s window switch the corresponding window switch on the drivers master window switch becomes full auto for that particular window, enabling the driver to have full auto function at their fingertips in addition to the passenger.
Partially remove the door panel to gain access to the underside of the window switch then it’s a simple plug and play installation, just unplug the existing window switch connector and fit the Y patch harness between the factory connector and window switch.
Always forgetting to close all the windows after you have removed the keys from the ignition or eliminate the possibility that your passenger’s have left the rear windows down without your knowledge leaving your vehicles contents vulnerable.
This module allows for all windows to be automatically closed every time the vehicle is locked using the key remote, button on the door handle (on applicable models) while still allowing for remote operation using your original key remote to open or close the windows.
Transforms all the existing window switches on the drivers side to one touch open / close.
Reviews
There are no reviews yet.