| Weight | 0.030 kg |
|---|---|
| Dimensions | 10 × 10 × 2 cm |
| Make | Model | Year |
|---|---|---|
| Electrical | Universal | 1990 - 2022 |
A direct replacement LED SMD (surface mounted diode) panel has been designed to fit seamlessly into the forth generation Suzuki Jimny (JB64W, JB74W) models from 2018 to current interior light fixtures.
These replace the standard factory bulbs without any modifications to the interior light fixtures providing a higher light output.
Sold as a set (front and back).
With a large 1/3 inch colour SONY® CCD sensor providing sharper and higher detail in all light conditions, than standard 1/4 inch colour CMOS sensor cameras, is pendulum mounted.
Input voltage is fully regulated to ensure a stable video signal across different input voltages.
With a large 1/3 inch colour SONY® CCD sensor providing sharper and higher detail in all light conditions, than standard 1/4 inch colour CMOS sensor cameras.
Easy installation as only one small four pin moulded connector (7mm diameter) four meters in length is required to pass through the firewall.
All exposed connections are all within the vehicle (video, power, mirror image and guidelines options) not in the extreme environment of the engine bay or under the rear of the vehicle.
Changing image from forward or reverse facing or adding guidelines is just a matter of cutting small, looped wires that are also located within the vehicle.
Input voltage is fully regulated to ensure a stable video signal across different input voltages and is again located within the vehicle.
When fitting a canopy or service body the rear high brake light should be disconnected to avoid glare in the rear-view mirror every time the brakes are applied.
If the rear high brake light lens cannot be removed due to a canopy or service body already in place, or you do not want to disturb the seal between the lens and vehicle body our rear high brake light delete patch harness can be utilised.
Reviews
There are no reviews yet.