Description
- Plug and play installation
- No changes to factory wiring required
- Maintains all factory functions
- Dedicated connectors preventing incorrect installation
- LED illumination – white
Suitable for the All New D-Max and BT-50 models.
Low on switch locations, this dual switch combines the factory TPMS and Traction Control functions into a single switch location.
Replaces the two separate factory switches with one dual function switch and is a direct replacement, no changes or modifications to the factory wiring required.
Simply unplug the factory connectors remove the factory switches and connect the supplied harness and dual switch.
The dual switch illumination is fully dimmable via the factory dimmer switch.
AUD$55.00
In stockIn stock
Weight | 0.037 kg |
---|---|
Dimensions | 9 × 9 × 3 cm |
Make | Model | Year |
---|---|---|
Isuzu | D-Max | 2023 - 2024 |
Mazda | BT-50 | 2023 - 2024 |
Suits Holden RG Colorado (Pre-Facelift) 2012 – 2016 both single and dual cab models.
Once installed to any of the passenger’s window switches, to operate simply tap the existing switch once and the window will fully open or close without the need to keep holding the window switch in position.
Manual operation is still maintained, hold the switch to operate the window and release at any time for the window to stop.
Once fitted to the passenger’s window switch the corresponding window switch on the drivers master window switch becomes full one touch auto for that particular window, enabling the driver to have full one touch auto function at their fingertips in addition to the passenger.
Remove the trim around the factory switch then it’s a simple plug and play installation, just unplug the existing window switch connector and fit the Y patch harness between the factory connector and window switch in place.
Suitable for Isuzu models from 2011 onwards fitted with a factory reverse camera are compatible, including the All New D-MAX, MU-X models and Mazda BT-50 MY21 to MY23.
Our system allows for simple Plug & Play integration to the existing factory head unit without the need to damage the existing wiring, NO cutting of any factory wiring is required. The included wiring harness is fully terminated so no additional wiring is required simply plug the patch connectors into the factory head unit and supplied dash switch.
We can also offer the small switch that is located next to the transmission (D-Max My21 to MY23) and if applicable the lower central dash either side of the airbag warning indicator (MU-X MY21 to MY23) that do not have the heated seats) simply select small single switch (AT1-S) in the drop down box.
Theses switches are a direct replacement with no modification to your trim required.
Two great functions incorporated in the same module that is fully 100% direct plug & play no splicing into the vehicles central locking wires required.
Can also be fitted to models that do not have the factory auto folding mirrors for the auto window function.
Once the vehicle is locked using the key remote the side mirrors fold in and fold back once the vehicle is unlocked using the key remote (models with factory fitted electric folding mirrors).
Always forgetting to close all the windows after you have removed the keys from the ignition or eliminate the possibility that your passenger’s have left the rear windows down without your knowledge leaving your vehicles contents vulnerable.
This module allows for all windows to be automatically closed every time the vehicle is locked using the key remote, while still allowing for remote operation using your original key remote to open or close the windows.
Transforms all the existing window switches on the drivers side to one touch open / close.
Two great functions incorporated in the same module that is fully 100% direct plug & play no splicing into the vehicles central locking wires required.
Once the vehicle is locked using the key remote or button on the door handle the side mirrors fold in and fold back once the vehicle is unlocked using the key remote (models with factory fitted electric folding mirrors).
Always forgetting to close all the windows after you have removed the keys from the ignition or eliminate the possibility that your passenger’s have left the rear windows down without your knowledge leaving your vehicles contents vulnerable.
This module allows for all windows to be automatically closed every time the vehicle is locked using the key remote, while still allowing for remote operation using your original key remote to open or close the windows.
Transforms all the existing window switches on the drivers side to one touch open / close.
Suits all N80 SR models without factory one touch auto window open/close operation.
Once installed to any of the passenger’s window switches, to operate simply tap the existing switch once and the window will fully open or close without the need to keep holding the window switch in position.
Manual operation is still maintained, hold the switch to operate the window and release at any time for the window to stop.
Once fitted to the passenger’s window switch the corresponding window switch on the drivers master window switch becomes full one touch auto for that particular window, enabling the driver to have full one touch auto function at their fingertips in addition to the passenger.
Remove the trim around the factory switch then it’s a simple plug and play installation, just unplug the existing window switch connector and fit the Y patch harness between the factory connector and window switch in place.
Reviews
There are no reviews yet.