Description
- Metal cap
- Inner rubber seal
- Metal chain 60mm in length
- 7mm diameter split ring
Fits on the end of a M12 male four pin connector
AUD$4.50
In stockIn stock
Weight | 0.05 kg |
---|---|
Dimensions | 3 × 3 × 2 cm |
Make | Model | Year |
---|---|---|
Electrical | Universal | 1990 - 2022 |
Compatible with the new facelift MY24 D-Max, fitted with LED headlights that uses the new eight pin connector.
With a large 1/3 inch colour SONY® CCD sensor providing sharper and higher detail in all light conditions, than standard 1/4 inch colour CMOS sensor cameras, is pendulum mounted.
Input voltage is fully regulated to ensure a stable video signal across different input voltages.
A complete system including:
Optional audio input to AUX factory head unit (select Yes in the option box)
This camera is ideally suited for vertically mounting on the back of a caravan.
With a large 1/3 inch colour SONY® CCD sensor providing sharper and higher detail in all light conditions, than standard smaller 1/4 inch colour CMOS sensor cameras.
When fitting a canopy or service body the rear high brake light should be disconnected to avoid glare in the rear-view mirror every time the brakes are applied.
If the rear high brake light lens cannot be removed due to a canopy or service body already in place, or you do not want to disturb the seal between the lens and vehicle body our rear high brake light delete patch harness can be utilised.
With a large 1/3 inch colour SONY® CCD sensor providing sharper and higher detail in all light conditions, than standard 1/4 inch colour CMOS sensor cameras.
Easy installation as only one small four pin moulded connector (7mm diameter) four meters in length is required to pass through the firewall.
All exposed connections are all within the vehicle (video, power, mirror image and guidelines options) not in the extreme environment of the engine bay or under the rear of the vehicle.
Changing image from forward or reverse facing or adding guidelines is just a matter of cutting small, looped wires that are also located within the vehicle.
Input voltage is fully regulated to ensure a stable video signal across different input voltages and is again located within the vehicle.
Reviews
There are no reviews yet.