Anytime Reverse – Factory Reverse Camera

Code: AT-1
Anytime Reverse - Factory Reverse Camera
Anytime Reverse - Factory Reverse Camera - Image 2
Anytime Reverse - Factory Reverse Camera - Image 3

Suitable for Isuzu models from 2011 onwards fitted with a factory reverse camera are compatible, including the All New D-MAX, MU-X models and Mazda BT-50 MY21 to MY24 including the face lift MY24 D-Max.

Our system allows for simple Plug & Play integration to the existing factory head unit without the need to damage the existing wiring, NO cutting of any factory wiring is required. The included wiring harness is fully terminated so no additional wiring is required simply plug the patch connectors into the factory head unit and supplied dash switch.

We can also offer the small switch that is located next to the transmission (D-Max My21 to MY23) and if applicable the lower central dash either side of the airbag warning indicator (MU-X MY21 to MY23) that do not have the heated seats, simply select small single switch (AT1-S) in the drop down box.

Theses switches are a direct replacement with no modification to your trim required.

 

AUD$70.00 – AUD$110.00

In stock

Description

Anytime Reverse – Factory Reverse Camera 

Enables you to display the factory reverse camera in any gear, by simply activating the supplied factory styled dash switch, that fits into an existing blank switch location . Once activated your factory reverse camera is displayed on the existing factory head unit regardless of the gear selected.

When the switch is in the off position the reverse camera will only then be displayed on the factory head unit, once reverse gear has been selected.

AT1 & AT1-S:

  • System is fully Plug & Play zero modification to the factory wiring is required – no cutting or splicing wires required during installation, simply fit our patch harness between the existing factory connectors behind the head unit
  • Factory styled switch is provided for seamless integration to your dash
  • Navigation, radio, Bluetooth, Android Auto & Apple Car Play audio is uninterrupted when the switch is in the on position
  • For use with the factory reverse camera
  • The factory head unit is required to be removed before installation
  • Activates the factory reverse camera only
  • Tools required – Trim tools and a Phillips PH1 screwdriver
  • Installation instructions are included via the QR code on the front of the packaging.

Three different configurations are available:

Both systems allow for the factory camera to be activated in any gear, they do not allow for an auxiliary camera to be added refer to our AT2 & AT3 systems

AT1 : Factory reverse camera anytime activation, large switch supplied for fitment upper dash (right-hand side of steering wheel).

AT1-S : Factory reverse camera anytime activation small switch supplied for fitment lower dash (around transmission for D-Max / BT-50 and each side of air bag warning light for MU-X  models that do not have heated seats).

AT1TC : Factory reverse camera anytime activation, incorporating Traction Control switch (not suitable for the MU-X) refer P# AT1MUX

Enables you to display the factory reverse camera in any gear, by simply activating the supplied factory styled dual dash switch, that fits into an existing Traction Control switch location on the upper dash. Once activated your factory reverse camera is displayed on the existing factory head unit regardless of the gear selected.

When the switch is in the off position the reverse camera will only then be activated on the factory head unit, once reverse gear has been selected.

The dual switch is also a direct plug and play replacement with the factory Traction Control switch so no modification to the factory wiring is required, simply remove existing factory Traction Control switch and fit replacement dual switch.

Once the dual switch is fitted the Traction Control functions in exactly the same way as the factory switch did. To deactivate hold switch down TCS OFF is turned off, hold longer Traction Control is turned off, both illuminating orange in the centre dash cluster press and hold again to deactivate. The system will also deactivate every time the vehicle is turned off and back on (in exactly the same manner as the factory switch operated).

  • System is fully Plug & Play zero modification to the factory wiring is required – no cutting or splicing wires required during installation, simply fit our patch harness between the existing factory connectors
  • Factory styled dual  function switch is provided for seamless integration to your dash
  • Dual switch illumination is fully dimmable when adjusting the factory dimmer
  • Navigation, radio, Bluetooth, Android Auto & Apple Car Play audio is uninterrupted when the switch is in the on position
  • For use with the factory reverse camera only
  • The factory head unit is NOT required to be removed during installation
  • Tools required – Trim tools and a Phillips PH1 screwdriver
  • Installation instructions are included via the QR code on the front of the packaging.

MY21 onwards models including the face lift MY24 D-Max and MY25 BT-50.

NOTE: These systems are not suitable for adding additional auxiliary cameras, they are only applicable to the factory reverse camera, for dual camera system refer to our AT2, AT2-4PIN and AT3 systems.

Additional information

Weight 0.075 kg
Dimensions 17 × 14 × 3 cm
Make Model Year
Isuzu D-Max MU-X 2012 - 2025
Isuzu D-Max SX 2021 - 2025
Isuzu D-Max X-Terrain 2021 - 2025
Isuzu MU-X LS-M 2021 - 2025
Isuzu MU-X LS-T 2021 - 2025
Isuzu MU-X LS-U 2021 - 2025
Mazda BT-50 2021 - 2025
Mazda BT-50 GT 2021 - 2025
Mazda BT-50 XTR 2021 - 2025

Reviews

There are no reviews yet.

Be the first to review “Anytime Reverse – Factory Reverse Camera”

Your email address will not be published. Required fields are marked *


Products that also suit

  • One touch Window Module Suits Nissan Passengers Window Switch
    Auto Accessories

    One touch Window Module Suits Nissan Passengers Window Switch

    Once installed to any of the passenger’s window switches, to operate simply tap the existing switch once and the window will fully open or close without the need to keep holding the window switch in position.

    Manual operation is still maintained, hold the switch to operate the window and release at any time for the window to stop.

    Once fitted to the passenger’s window switch the corresponding window switch on the drivers master window switch becomes full auto for that particular window, enabling the driver to have full auto function at their fingertips in addition to the passenger.

     

    (0 reviews)
    AUD$48.00 Add to cart
  • Auto up/down Window Module Suits Toyota Hilux N80 Passengers Window Switch
    Auto Accessories

    Auto up/down Window Module Suits Toyota Hilux N80 Passengers Window Switch

    Suits all N80 SR models without factory one touch auto window open/close operation.

    Once installed to any of the passenger’s window switches, to operate simply tap the existing switch once and the window will fully open or close without the need to keep holding the window switch in position.

    Manual operation is still maintained, hold the switch to operate the window and release at any time for the window to stop.

    Once fitted to the passenger’s window switch the corresponding window switch on the drivers master window switch becomes full one touch auto for that particular window, enabling the driver to have full one touch auto function at their fingertips in addition to the passenger.

    Remove the trim around the factory switch then it’s a simple plug and play installation, just unplug the existing window switch connector and fit the Y patch harness between the factory connector and window switch in place.

     

    (0 reviews)
    AUD$48.00 Add to cart
  • Auto Folding Mirror Module Suits Isuzu D-Max
    Auto Accessories

    Auto Folding Mirror Module Suits Isuzu D-Max
    Auto Folding P31 Mirror Module suitable for the all new 3rd Generation Isuzu D-Max MY21 – onwards
     
    Module function: Mirrors will fold automatically in when the vehicle is locked using the remote key fob or touch panel on the door handle, allowing full use of the mirrors to safely exit the vehicle on busy roads.
    Unlock doors using key remote or touch panel on the door handle both mirrors will fold back out.
    Models with proximity locking the mirrors will also fold in when the vehicle automatically locks.
    The module can be configured during the installation to unfold the mirrors when the vehicles is unlocked (default) or when the ignition is turned on (user selectable upon installation).
    Having the ability to fold the vehicles mirrors when locked will greatly reduce the risk of them be damaged by passing cars, cyclist and pedestrians and is a visual indication that the vehicle has been locked.
    Retain full use of the mirrors to safely exiting the vehicle.
     
    The existing mirror fold button retains full function and overrides the operation of the P31 module when the vehicles ignition is on.
    Suits both X-Terrain and LS-U models fitted with electric folding mirrors.
    (2 reviews)
    AUD$99.00 Add to cart
  • Dual Switch (Hands-free off and Fan switch)
    Auto Accessories

    Dual Switch (Hands-free off and Fan switch)

    Suitable for the MU-X models that have the factory Hands Free Off switch option.

    Low on switch locations, this dual switch combines the factory Hands-Free off switch and the rear Fan functions into a single switch location.

    Replaces the two separate factory switches with one dual function switch and is a direct replacement, no changes or modifications to the factory wiring required.

    Simply unplug the factory connectors remove the factory switches and connect the supplied harness and dual switch.

    The dual switch illumination is fully dimmable via the factory dimmer switch.

     

     

     

    (0 reviews)
    AUD$55.00 Add to cart
  • Auto Folding Mirror Module suits Subaru BRZ (ZD8)
    Auto Accessories

    Auto Folding Mirror Module suits Subaru BRZ (ZD8)
    Auto Folding Mirror Module suitable for the second generation Subaru BRZ (ZD8) models
     
    Module function: Mirrors will fold automatically in when the vehicle is locked using the remote key fob or touch panel on the door handle, allowing full use of the mirrors to safely exit the vehicle on busy roads.
    Unlock doors using key remote or touch panel on the door handle both mirrors will fold back out.
    The module can be configured during the installation to unfold the mirrors when the vehicle is unlocked (default) or when the ignition is turned on (user selectable upon installation).
    Having the ability to fold the vehicles mirrors when locked will greatly reduce the risk of them be damaged by passing cars, cyclist and pedestrians.
     
    The existing mirror fold button retains full function and overrides the operation of the auto fold module. 
    (0 reviews)
    AUD$99.00 Add to cart
  • Auto Window Module Suits Mitsubishi Pajero Sport QE
    Auto Accessories

    Auto Window Module Suits Mitsubishi Pajero Sport QE

    Always forgetting to close all the windows after you have removed the keys from the ignition or eliminate the possibility that your passenger’s have left the rear windows down without your knowledge leaving your vehicles contents vulnerable.

    Transforms all the existing window switches on the drivers side to one touch open / close.

    This module allows for all windows to be automatically closed every time the vehicle is locked using the key remote, while still allowing for remote operation using your original key remote to open or close the windows.

    Suits Mitsubishi Pajero Sport / Exceed QE 10/2015 – 2020

    (Is NOT compatible with the later model QF)

    (3 reviews)
    AUD$140.00 Add to cart
-