Auto Folding P41 Mirror Module suitable for the first generation Toyota 86 and Subaru BRZ models
Module function: Mirrors will fold automatically in when the vehicle is locked using the remote key fob or touch panel on the door handle, allowing full use of the mirrors to safely exit the vehicle on busy roads.
Unlock doors using key remote or touch panel on the door handle both mirrors will fold back out.
The module can be configured during the installation to unfold the mirrors when the vehicles is unlocked (default) or when the ignition is turned on (user selectable upon installation).
Having the ability to fold the vehicles mirrors when locked will greatly reduce the risk of them be damaged by passing cars, cyclist and pedestrians.
The existing mirror fold button retains full function and can override the operation of the P41 module.
Auto Folding Mirror Module suitable for the Mazda 2
(DJ/DL) 02/2017 – 2026
Before purchasing ensure your window and mirror switch are the same as shown.
Module function: Mirrors will fold automatically in when the vehicle is locked, allowing full use of the mirrors to safely exit the vehicle on busy roads.
Unlock doors both mirrors will fold back out.
The module can be configured during the installation to unfold the mirrors when the vehicles is unlocked (default) or when the ignition is turned on (user selectable upon installation).
Having the ability to fold the vehicles mirrors when locked will greatly reduce the risk of them be damaged by passing cars, cyclist and pedestrians and is a great visual indictor that the vehicle has been locked
The existing mirror fold button retains full function and overrides the operation of the module when the vehicles ignition is on.
Always forgetting to close all the windows after you have removed the keys from the ignition or eliminate the possibility that your passenger’s have left the rear windows down without your knowledge leaving your vehicles contents vulnerable.
This module allows for all windows to be automatically closed every time the vehicle is locked using the key remote, while still allowing for remote operation using your original key remote to open or close the windows.
Transforms all the existing window switches on the drivers side to one touch open / close.
100% direct plug & play no splicing into the vehicles central locking wires required.
Tailgate central locking harness suits Ford Ranger PX1, PX2, PX3 & Mazda BT50 models.
NOTE: No actuator or fitting kit is included with this harness. Only fits Mazda BT50 UR Models that have the key lock within the handle.
This 100% plug & play harness is suitable for vehicles that have the existing OEM central locking on the fuel cover.
Once installed to any of the passenger’s window switches, to operate simply tap the existing switch once and the window will fully open or close without the need to keep holding the window switch in position.
Manual operation is still maintained, hold the switch to operate the window and release at any time for the window to stop.
Once fitted to the passenger’s window switch the corresponding window switch on the drivers master window switch becomes full one touch auto for that particular window, enabling the driver to have full one touch auto function at their fingertips in addition to the passenger.
Remove the trim around the factory switch then it’s a simple plug and play installation, just unplug the existing window switch connector and fit the Y patch harness between the factory connector and window switch in place.
Once fitted, every time you start the vehicle within a few seconds the control module within the switch harness will automatically deactivate the factory Idle Stop System (ISS) function, there is no requirement to press the switch every time the ignition is turned on.
Should you need to revert back to the idle stop system function, once the engine is operating to temporary turn the idle off system back on, simply press the idle on switch and the function will be reinstated until the vehicle is restarted.
The traction control switch functions in exactly the same way as the factory switch did.
Auto Folding P110 Mirror Module suitable for the Subaru:
XV G5X – 05/2017 – 2023
Forester SK 09/2018 – 2025
Impreza (5th Generation) 11-2016 – 09-2023
Module function: Mirrors will fold automatically in when the vehicle is locked using the remote key fob or touch panel on the door handle, allowing full use of the mirrors to safely exit the vehicle on busy roads.
Unlock doors using key remote or touch panel on the door handle both mirrors will fold back out.
The module can be configured during the installation to unfold the mirrors when the vehicles is unlocked (default) or when the ignition is turned on (user selectable upon installation).
Having the ability to fold the vehicles mirrors when locked will greatly reduce the risk of them be damaged by passing cars, cyclist and pedestrians and is a visual indication that the vehicle has been locked.
The existing mirror fold button retains full function and overrides the operation of the P110 module when the vehicles ignition is on.
Trevor Roether (verified owner) –
Reasonably easy to install and it works a treat!