Reverse Caravan Camera (rectangle)

Code: CCD120R

This camera is ideally suited for vertically mounting on the back of a caravan.

With a large 1/3 inch colour SONY® CCD sensor providing sharper and higher detail in all light conditions, than standard smaller 1/4 inch colour CMOS sensor cameras.

Features
  • Ultra low light capability (auto switching to IR at 0Lux (18 IR LEDs)
  • High resolution
  • SONY® CCD image quality
  • Built in microphone
  • IP68 fully encapsulated electronics
  • Reverse mountable
  • Horizontal viewing angel of 120°
  • Fully regulated power supply
  • Housing construction die cast zinc alloy (black powder coated).

 

AUD$145.00

In stock

In stock

Description

Heavy duty auxiliary reverse camera  suitable for mounting vertically.

SPECIFICATIONS

Sensor 1/3 inch colour SONY® CCD
Signal CVBS
TV System NTSC
Resolution 700 TV lines
Effective pixels 768 (h) x 494 (v)
Viewing angle – diagonal 120°
Viewing angle – horizontal 120°
Waterproof rating IP68
Lens optics Glass
Operating temperature -20°C – +70°C
Video output: 1.0vp-p,750hm
White balance Auto
Automatic gain control (AGC) Auto
Rated voltage 12V DC
IR LEDs 18pcs
Power consumption 1 Watt
Microphone Yes
Camera connector M12 four pin
Camera input cable length 500mm
Housing construction Die cast zinc alloy
Dimensions (camera body) 77mm (w) x 45mm (h) x 70mm (d)
Dimensions (camera bracket) 80mm (w) x 55mm (h) x 40mm (d)
Weight including bracket and cable 345 grams
M12 Connector pin functions
  • Pin 1 – 12v positive
  • Pin 2 – Negative
  • Pin 3 – Audio
  • Pin 4 – Video signal

Camera selectable functions – None

Fixed reverse facing only non changeable, without guidelines

Contents

  • Reverse Camera
  • Hex key
  • Grommet (fitted to M12 four pin cable)

 

Warranty

Two Years

Additional information

Weight 0.400 kg
Dimensions 12 × 10 × 8 cm
Viewing Angle

120°
Make Model Year
Electrical Universal 1990 - 2023

Reviews

There are no reviews yet.

Be the first to review “Reverse Caravan Camera (rectangle)”

Your email address will not be published. Required fields are marked *

Products that also suit

    Electrical

    Reverse or Forward Facing Auxiliary Camera

    With a large 1/3 inch colour SONY® CCD sensor providing sharper and higher detail in all light conditions, than standard 1/4 inch colour CMOS sensor cameras.

    Features
    • Ultra low light capability
    • High resolution
    • SONY® CCD image quality
    • IP67
    • Forward or reverse mountable (mirror image changeable)
    • Guide lines changeable
    • Wide horizontal viewing angel (two models to choose from 150°and 170° )
    • Fully regulated power supply
    • Bracket adjustable / removable.

    Easy installation as only one small four pin moulded connector (7mm diameter) four meters in length is required to pass through the firewall.

    All exposed connections are all within the vehicle (video, power, mirror image and guidelines options) not in the extreme environment of the engine bay or under the rear of the vehicle.

    Changing image from forward or reverse facing or adding guidelines is just a matter of cutting small, looped wires that are also located within the vehicle.

    Input voltage is fully regulated to ensure a stable video signal across different input voltages and is again located within the vehicle.

     

    (0 reviews)
    AUD$77.00 Select options This product has multiple variants. The options may be chosen on the product page
    Electrical

    Interior LED Lights suits 4th Gen Suzuki Jimny

    A direct replacement LED SMD (surface mounted diode) panel has been designed to fit seamlessly into the forth generation Suzuki Jimny (JB64W, JB74W) models from 2018 to current interior light fixtures.

    These replace the standard factory bulbs without any modifications to the interior light fixtures providing a higher light output.

    Sold as a set (front and back).

    (0 reviews)
    AUD$22.00 Add to cart
  • Sale!
    Electrical

    MU-X (Second Generation) Headlight Patch Harness

    Second generation MU-X headlight patch harness (08/2021 onwards)

    No cutting of the factory wiring is required, simply unplug the existing factory connector and fit the patch harness.

    Then connect the output connector to your existing wiring harness (a range of connectors to suit popular lighting brands are available).

     

    (0 reviews)
    Original price was: AUD$44.00.Current price is: AUD$33.00. Add to cart
    Electrical

    M12 4 Pin to RCA Adaptor
    M12 4Pin aviation male connector to male RCA connector and 12v positive and negative connections
    (0 reviews)
    AUD$12.00 Add to cart
    Electrical

    Heavy Duty Quick Release Coiled Cable

    This heavy-duty coil cable enables for a quick connection between the vehicle and caravan/trailer it can be extended up to 1.5mtrs.

    The four pin connectors allow for a single channel video signal along with audio and power (+/-) between the caravan/trailer.

    Supplied as a set:

    Coil cable and two fixed sockets with male and female M12 four pin connectors.

     

    (0 reviews)
    AUD$99.00 Add to cart
    Electrical

    D-MAX MY24 Facelift Headlight Patch Harness

    Compatible with the new facelift MY24 D-Max, fitted with LED headlights that uses the new eight pin connector.

     

     

     

     

    (0 reviews)
    AUD$30.00 Add to cart
-