Auto up/down Window Module Suits Toyota Aurion

Code: WMGS
Auto up/down Window Module Suits Toyota Aurion

Suits Toyota Aurion passengers window switch.

Once installed to any of the passenger’s window switches, to operate simply tap down the existing switch once and the window will fully open flick up to auto close without the need to keep holding the window switch in position.

Manual operation is still maintained, hold the switch to operate the window and release at any time for the window to stop.

 

 

AUD$48.00

In stock

In stock

Description

Module Function: 

Transforms a single passengers window switch and the corresponding window switch on the drivers master window switch to full one touch auto operation.

The patch harness is fully 100% direct plug & play connecting to the passengers factory window switch connector, so no splicing or connecting to any individual wires is required.

 

IMPORTANT NOTE: Our system uses current sensing to operate the window regulator, it does not use anti pinch so if a object is in encountered between the window and door frame the window will stop. Once the obstruction has been removed the window switch can be reused to continue window movement.

The window lock switch on the master window switch can still be used to isolate the passengers windows from operating.

If your windows are not functioning properly (very slow at opening or closing) our system will not be suitable as it will detect over current due to the window regulator working harder than it should stopping the window movement.

 

System includes:

  • Module – Auto one touch window control module
  • Y patch harness with full 100% direct plug & play connectors (no splicing wires required)
  • Adhesive pad (hook & loop) to attach module to inside trim
  • Installation instructions via a QR code on the packaging.

Operating features: 

  • Hold window switch up or down for manual control from the passengers or drivers master window switch.

    Window switch functions normally – window stops when the switch is released.

  • Tap the window switch once to initiate full auto window operation from the passengers or drivers master window switch.

    Window will automatically close / open without the need to keep holding the window switch.

 

 

Additional information

Weight 0.075 kg
Dimensions 10 × 8 × 3 cm
Make Model Year
Toyota Aurion (GSV40) 2007 - 2011
Toyota Aurion (GSV50) 2012 - 2017

Reviews

There are no reviews yet.

Be the first to review “Auto up/down Window Module Suits Toyota Aurion”

Your email address will not be published. Required fields are marked *


Products that also suit

  • Dual Switches Suitable for Suzuki Jimny
    Auto Accessories

    Dual Switches Suitable for Suzuki Jimny
    Dual switches suitable for the Suzuki Jimny  2018 – onward models (JB74).
     
    Replaces standard single factory switches to dual function switches, freeing up space for additional switches.
      
    Custom options also available
    (0 reviews)
    AUD$27.50 – AUD$55.00 Select options This product has multiple variants. The options may be chosen on the product page
  • Auto Window & Mirror Switch Module Suits Nissan Navara D23 NP300
    Auto Accessories

    Auto Window & Mirror Switch Module Suits Nissan Navara D23 NP300

    Two great functions incorporated into this full replacement master window switch module.

    Always forgetting to close all the windows after you have removed the keys from the ignition or eliminate the possibility that your passenger’s have left the rear windows down without your knowledge leaving your vehicles contents vulnerable.

    NOTE: This model is only suitable for Australian and New Zealand NP300 models as other countries use a different connection for the door lock actuator so a plug and play patch harness is not available.

    (4 reviews)
    AUD$195.00 Add to cart
  • Auto Folding Mirror Module suits Mazda CX5 (KF)
    Auto Accessories

    Auto Folding Mirror Module suits Mazda CX5 (KF)
    Auto Folding P111 Mirror Module suitable for the Mazda CX-5
    • Second generation (KF) 2017 – 2025

     

    Module function: Mirrors will fold automatically in when the vehicle is locked using the remote key fob or touch panel on the door handle, allowing full use of the mirrors to safely exit the vehicle on busy roads.
    Unlock doors using key remote or touch panel on the door handle both mirrors will fold back out.
    Having the ability to fold the vehicles mirrors when locked will greatly reduce the risk of them be damaged by passing cars, cyclist and pedestrians and is a great visual indictor that the vehicle has been locked.
     
    The existing mirror fold button retains full function and overrides the operation of the P111 module when the vehicles ignition is on.
    (0 reviews)
    AUD$99.00 Add to cart
  • Auto Window, Mirror & Passengers window Modules Suits All New Isuzu D-Max
    Auto Accessories

    Auto Window, Mirror & Passengers window Modules Suits All New Isuzu D-Max

    Two great functions incorporated in the same module that is fully 100% direct plug & play no splicing into the vehicles central locking wires required.

    Once the vehicle is locked using the key remote or button on the door handle the side mirrors fold in and fold back once the vehicle is unlocked using the key remote or button on the door handle (models with factory fitted electric folding mirrors).

    Models with proximity locking, the mirrors will also fold in and any open windows will close when the vehicle automatically locks.

    Always forgetting to close all the windows after you have removed the keys from the ignition or eliminate the possibility that your passenger’s have left the rear windows down without your knowledge leaving your vehicles contents vulnerable.

    This module allows for all windows to be automatically closed every time the vehicle is locked using the key remote, while still allowing for remote operation using your original key remote to open or close the windows.

    Transforms all the existing window switches on the drivers side to one touch open / close and an additional module that is fitted to a passengers window switch allowing the passenger to operate their switch in full auto mode.

    Suits Blade, X-Terrain and LS-U models fitted with electric folding mirrors.

    (5 reviews)
    AUD$195.00 Add to cart
  • Auto Folding Mirror Module & Central Locking Tailgate Bundle System suits Ford Ranger
    Auto Accessories

    Auto Folding Mirror Module & Central Locking Tailgate Bundle System suits Ford Ranger
    Auto Folding P51A Mirror Module & Central locking tailgate system suitable for the Ford Ranger 
     
    This system is fully compatible with the Ford Ranger MK2, MK3 & PU from 2015 – 2022 that have the mirror fold button above the mirror adjustment switch. 
    Note: Not suitable for the Next Gen Ford Ranger
     
    Mirror Module function: Lock doors using the key remote or touch censor on the door handle (if equipped). both mirrors fold in, unlock doors using key remote both mirrors fold back out or turn ignition on mirrors fold out (this is user defined on installation).
    Having the ability to fold the vehicles mirrors when locked will greatly reduce the risk of them be damaged by passing cars, cyclist and pedestrians.
     
    The existing mirror fold button retains full function and can override the operation of the P51A module. 

    Central locking Tailgate system suits:

    No splicing into the vehicles electrical system is required this is a 100% true plug & play harness connecting to the existing factory central locking connector that is located behind the fuel release cover.

    Uses existing vehicles remote or via the door handle sensor (if equipped).

    Laser cut 304 Stainless steel actuator bracket included, so no additional drilling into the vehicles metal tailgate required uses existing mounting fixtures.
    Pre-bent actuator rod is also supplied so no additional fabrication required.

    Features:

    • No soldering or splicing into the existing wiring required, true plug & play
    • Direct connections to the factory wiring and actuator
    • Approximately 3 meters in length
    • Cable is fully protected by convoluted tubing
    • Manufactured here in Australia
    • Cable ties included
    • Torx T30 bit included
    • 3mm Hex shaft drill bit included
    • High quality actuator with Japanese Mabuchi motor with controlled push/pull force of > 4.0kgs for long term reliability
    • Housing is made from Nylon & POM is fully sealed with reinforced steel rivets
    • The actuator head has a full 360° rotation and is fully removable making installation of the included metal rod simple
    • Laser cut 304 Stainless steel actuator bracket, so no additional drilling into the vehicles metal tailgate required as uses existing mounting fixtures
    • Pre-bent actuator rod so no additional fabrication required
    • Comprehensive DIY installation instructions provided (via downloadable link just scan the QR code included with the packaging).
    (0 reviews)
    AUD$200.00 Add to cart
  • Custom Made
    Auto Accessories

    Custom Made

    Custom Made products page

    Please contact us if you require a auto mirror, window system that does not appear on our website, we may just be able to produce for you

     

     

     

    (0 reviews)
    AUD$66.00 Add to cart
-